(06-29-2021, 10:43 PM)Tim Curtis Wrote:

(06-29-2021, 10:09 PM)fdealexa Wrote: Hello everybody,
would anyone be kind enough to try to help me?!?!?!?
I tried a fresh install twice and encountered the following problem: the

Quote:/var/local/www/currentsong.txt

it exists but is empty.
I have also tried, on the same system, to upgrade from 7.2.1 and it seems that the problem does not occur.
Do you have any suggestions?
Sincerely and thanks,

Francesco

On the r730 release image:

As shipped the file is empty

Code:

pi@moode:~ $ cat /var/local/www/currentsong.txt
pi@moode:~ $

After turning the "Metadata file" option ON in System Config it gets populated

Code:

pi@moode:~ $ cat /var/local/www/currentsong.txt
file=SDCARD/Stereo Test/LRMonoPhase4.flac
artist=Koz
album=Stereo Test
title=LR Channel And Phase
coverurl=/coverart.php/SDCARD%2FStereo%20Test%2FLRMonoPhase4.flac
track=1
date=1997
composer=
encoded=16/48 FLAC
bitrate=431 kbps
outrate=0 bps
volume=0
mute=0
state=pause
pi@moode:~ $

(06-30-2021, 02:21 AM)Macdelf Wrote:

(06-30-2021, 02:10 AM)Macdelf Wrote:

(06-30-2021, 01:05 AM)Tim Curtis Wrote: Can you provide the file(s) and steps to repro the issue?

Code:

---
devices:
 adjust_period: 10
 capture:
   type: File
   channels: 2
   filename: /dev/stdin
   format: S32LE
 capture_samplerate: 0
 chunksize: 4096
 enable_rate_adjust: true
 enable_resampling: false
 playback:
   type: Alsa
   channels: 2
   device: hw:2,0
   format: S32LE
 queuelimit: 32
 resampler_type: BalancedAsync
 samplerate: 192000
 silence_threshold: 0
 silence_timeout: 0
 target_level: 0
filters:
 Lconv:
   parameters:
     filename: ../../../../home/pi/L_impulse_$samplerate$_rew.txt
     format: TEXT
     read_bytes_lines: 0
     skip_bytes_lines: 15
     type: Raw
   type: Conv
 Rconv:
   parameters:
     filename: ../../../../home/pi/R_impulse_$samplerate$_rew.txt
     format: TEXT
     read_bytes_lines: 0
     skip_bytes_lines: 15
     type: Raw
   type: Conv
 gainred:
   parameters:
     gain: -2
     inverted: false
     mute: false
   type: Gain
pipeline:
- channel: 0
 names:
 - gainred
 - Lconv
 type: Filter
- channel: 1
 names:
 - gainred
 - Rconv
 type: Filter
...

The Impulse file is too large but here is the beginning
* Impulse Response data saved by REW V5.20                              
* IR is not normalised                                                  
* IR window has not been applied                                        
* IR is not the min phase version                                      
* Source: Microphone (Umik-1  Gain: 18dB  ), MICROPHONE (Master Volume),
* Dated: Jan 25, 2021 11:13:13 AM                                      
* Measurement: speakers set digital out Jan 25                          
* Excitation: 512k Log Swept Sine, 1 sweep at -12.0 dBFS using an acoust
* Response measured over: 10.0 to 20,000.0 Hz                          
0.1121257991      // Peak value before normalisation
       11024       // Peak index
       22051  // Response length
0.0000226757  // Sample interval (seconds)
-0.2500113249       // Start time (seconds)
* Data start
-0.0000033564495
-0.000002893786
-0.0000030472875
-0.0000031913376
-0.0000033453098
-0.0000032243236
-0.0000026446

Is there a way to send very large files? I cannot seem to attach the .txt impulse file. BTW the REW header is not used it is there just so I can debug in REW. I geneated the function by measuring with REW and my own Fourier transform. When I run this it dous seem to give the correcet amplitude results with a frequency sweep. It is a symettric impulse response and should have linear phase. REW says it does too. The phase plot from the moode pipeline editor  bugs me and must be wrong.

(06-30-2021, 10:22 AM)Tim Curtis Wrote:

(06-30-2021, 02:21 AM)Macdelf Wrote:

(06-30-2021, 02:10 AM)Macdelf Wrote:

(06-30-2021, 01:05 AM)Tim Curtis Wrote: Can you provide the file(s) and steps to repro the issue?

Code:

---
devices:
 adjust_period: 10
 capture:
   type: File
   channels: 2
   filename: /dev/stdin
   format: S32LE
 capture_samplerate: 0
 chunksize: 4096
 enable_rate_adjust: true
 enable_resampling: false
 playback:
   type: Alsa
   channels: 2
   device: hw:2,0
   format: S32LE
 queuelimit: 32
 resampler_type: BalancedAsync
 samplerate: 192000
 silence_threshold: 0
 silence_timeout: 0
 target_level: 0
filters:
 Lconv:
   parameters:
     filename: ../../../../home/pi/L_impulse_$samplerate$_rew.txt
     format: TEXT
     read_bytes_lines: 0
     skip_bytes_lines: 15
     type: Raw
   type: Conv
 Rconv:
   parameters:
     filename: ../../../../home/pi/R_impulse_$samplerate$_rew.txt
     format: TEXT
     read_bytes_lines: 0
     skip_bytes_lines: 15
     type: Raw
   type: Conv
 gainred:
   parameters:
     gain: -2
     inverted: false
     mute: false
   type: Gain
pipeline:
- channel: 0
 names:
 - gainred
 - Lconv
 type: Filter
- channel: 1
 names:
 - gainred
 - Rconv
 type: Filter
...

The Impulse file is too large but here is the beginning
* Impulse Response data saved by REW V5.20                              
* IR is not normalised                                                  
* IR window has not been applied                                        
* IR is not the min phase version                                      
* Source: Microphone (Umik-1  Gain: 18dB  ), MICROPHONE (Master Volume),
* Dated: Jan 25, 2021 11:13:13 AM                                      
* Measurement: speakers set digital out Jan 25                          
* Excitation: 512k Log Swept Sine, 1 sweep at -12.0 dBFS using an acoust
* Response measured over: 10.0 to 20,000.0 Hz                          
0.1121257991      // Peak value before normalisation
       11024       // Peak index
       22051  // Response length
0.0000226757  // Sample interval (seconds)
-0.2500113249       // Start time (seconds)
* Data start
-0.0000033564495
-0.000002893786
-0.0000030472875
-0.0000031913376
-0.0000033453098
-0.0000032243236
-0.0000026446

Is there a way to send very large files? I cannot seem to attach the .txt impulse file. BTW the REW header is not used it is there just so I can debug in REW. I geneated the function by measuring with REW and my own Fourier transform. When I run this it dous seem to give the correcet amplitude results with a frequency sweep. It is a symettric impulse response and should have linear phase. REW says it does too. The phase plot from the moode pipeline editor  bugs me and must be wrong.

Sure it could be a bug in CamillaPlot but your file(s) are needed in order to try and reproduce the issue so it could possibly be debugged.

You'll need to use a download service like DropBox, Google Drive etc for large files.

ETA: Missed your PM, thanks for the download link.

(06-29-2021, 10:26 PM)oculto Wrote:

(06-29-2021, 10:09 PM)uteroid Wrote: After the updated, I no longer see the 'Spotify Connected' screen when I go to the web interface and connected to Spotify, I can freely browse the web interface.  Though if I try to play a song while Spotify is connected, I get an error "Failed to open "ALSA Default" (alsa); Failed to open ALSA device "_audioout": Device or resource busy".  Is this expected behavior?

Same behavior as mine, and I am not sure if spotify render is using any EQ or respect any other settings. I cannot see the AUDIO INFO anymore with spotify (before was i little tricky but it was possible from any other screen)

(06-30-2021, 06:26 PM)TheOldPresbyope Wrote: @Macdelf

It's been many decades since I played with Bode plots and that was in RF applications. I've forgotten more than I ever knew

Doesn't REW itself offer a way to create a phase plot from your data? What does that look like compared to the C-DSP plot?

Regards,
Kent

(06-30-2021, 08:59 PM)Tim Curtis Wrote: When I tested the update on a stock r721 image everything looked ok but its always possible I missed something.

If more reports come in with same issue I'll go ahead and retest the update.