![]() |
Spotify will not advance to next track - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: Spotify will not advance to next track (/showthread.php?tid=4416) |
Spotify will not advance to next track - matt.fugate - 10-29-2021 I have a raspberry pi running 7.4.1 2021-10-02. the os is up to date as is moOde. when connected to the spotify renderer it will play until the next track and never advance. I have checked everything I know to check the account is premium ect. here is the output of moodutil -l pi@moode:~ $ moodeutl -l 20211029 104459 worker: -- Start 20211029 104500 worker: Successfully daemonized 20211029 104500 worker: Integrity check (passed) 20211029 104501 worker: File check (OK) 20211029 104501 worker: Session vacuumed 20211029 104501 worker: Session loaded 20211029 104501 worker: Debug logging (OFF) 20211029 104501 worker: -- Audio debug 20211029 104501 worker: ALSA cards: (0:empty | 1:empty | 2:empty | 3:empty 20211029 104501 worker: MPD config: (1 ![]() ![]() 20211029 104501 worker: WARNING: No device found at MPD configured card 1 20211029 104501 worker: -- System 20211029 104502 worker: Host (moode) 20211029 104503 worker: moOde (7.4.1 2021-10-02) 20211029 104503 worker: RaspiOS (10.11) 20211029 104503 worker: Kernel (5.10.63-v7+ #1459) 20211029 104503 worker: Platform (Pi-3B+ 1.3 1GB) 20211029 104503 worker: ARM arch (armv7l, 32-bit kernel) 20211029 104503 worker: MPD ver (0.22.11_p0x3) 20211029 104503 worker: CPU gov (ondemand) 20211029 104503 worker: USB boot enabled 20211029 104503 worker: File system expanded 20211029 104503 worker: HDMI port off 20211029 104503 worker: -- Network 20211029 104503 worker: eth0 exists 20211029 104503 worker: IP addr (192.168.1.154) 20211029 104503 worker: Netmask (255.255.255.0) 20211029 104503 worker: Gateway (192.168.1.1) 20211029 104503 worker: Pri DNS (192.168.1.1) 20211029 104503 worker: Domain (FINEPERIO.local) 20211029 104503 worker: wlan0 exists 20211029 104503 worker: wifi country (US) 20211029 104503 worker: wlan0 SSID is blank 20211029 104503 worker: eth0 addr exists, AP mode not started 20211029 104503 worker: wlan0 address not assigned 20211029 104503 worker: Pi integrated wlan0 power save disabled 20211029 104503 worker: -- Audio config 20211029 104503 worker: MPD conf update skipped (USB device) 20211029 104503 worker: ALSA card number (1) 20211029 104503 worker: MPD audio output (Pi Headphone jack) 20211029 104503 worker: WARNING: No device found at MPD configured card 1 20211029 104503 worker: ALSA mixer name (Invalid card number.) 20211029 104503 worker: MPD mixer type (fixed 0dB) 20211029 104503 worker: Hdwr volume controller exists 20211029 104503 worker: Max ALSA volume (90%) 20211029 104503 worker: ALSA output mode (Default: plughw) 20211029 104503 worker: ALSA loopback (Off) 20211029 104503 worker: Reset renderer active flags 20211029 104503 worker: CamillaDSP (off) 20211029 104503 worker: -- MPD startup 20211029 104503 worker: MPD started 20211029 104504 worker: MPD accepting connections 20211029 104504 worker: MPD output 1 ALSA Default (on) 20211029 104504 worker: MPD output 2 ALSA Bluetooth (off) 20211029 104504 worker: MPD output 3 HTTP Server (off) 20211029 104504 worker: MPD crossfade (off) 20211029 104504 worker: MPD ignore CUE files (yes) 20211029 104504 worker: -- Feature availability 20211029 104504 worker: Source select (available) 20211029 104504 worker: Source select (source: MPD) 20211029 104504 worker: Source select (output: Pi Headphone jack) 20211029 104504 worker: Bluetooth (available) 20211029 104504 worker: Airplay renderer (available) 20211029 104504 worker: Spotify renderer (available: started) 20211029 104504 worker: Squeezelite (available) 20211029 104504 worker: RoonBridge renderer (not installed) 20211029 104504 worker: Multiroom sender (available) 20211029 104504 worker: Multiroom receiver (available) 20211029 104504 worker: UPnP renderer (available) 20211029 104504 worker: DLNA server (available) 20211029 104504 worker: UPnP browser (available) 20211029 104504 worker: GPIO button handler (available) 20211029 104504 worker: Stream recorder (n/a) 20211029 104504 worker: -- Music sources 20211029 104504 worker: USB sources (none attached) 20211029 104504 worker: NAS and UPnP sources (none configured) 20211029 104504 worker: -- Other 20211029 104504 worker: USB volume knob (Off) 20211029 104504 worker: USB auto-mounter (udisks-glue) 20211029 104504 worker: LED0 (On) 20211029 104504 worker: LED1 (On) 20211029 104504 worker: Saved MPD vol level (0) 20211029 104504 worker: Preamp volume level (0) 20211029 104504 worker: MPD volume level (0) restored 20211029 104504 worker: ALSA Invalid card number. volume (Invalid card number.) 20211029 104504 worker: Auto-play (Off) 20211029 104504 worker: Maintenance interval (3 hours) 20211029 104504 worker: Screen saver activation (Never) 20211029 104504 worker: Session permissions (OK) 20211029 104504 worker: Watchdog started 20211029 104504 worker: Ready 20211029 105757 worker: Job spotifysvc 20211029 110149 worker: Job spotifysvc pi@moode:~ $ RE: Spotify will not advance to next track - Tim Curtis - 10-29-2021 Use a fresh unmodified 7.4.1 image. RE: Spotify will not advance to next track - matt.fugate - 10-29-2021 (10-29-2021, 04:11 PM)Tim Curtis Wrote: Use a fresh unmodified 7.4.1 image. thank you for the reply! RE: Spotify will not advance to next track - matt.fugate - 10-29-2021 Is there any way to do a clean reload via ssh? not the image but moOde? RE: Spotify will not advance to next track - TheOldPresbyope - 10-29-2021 (10-29-2021, 05:57 PM)matt.fugate Wrote: Is there any way to do a clean reload via ssh? not the image but moOde? No, but even if there were we'd still want you to install a fresh moOde image. It comes with the versions of RaspiOS, its packages, and Linux kernel on which moOde is built and which were customized during the build. That's the known state Tim and his merry band of testers use as the basis for diagnosing reported issues. In effect the image is moOde and moOde is the image. The moodeutl -l output includes these telltale signs that your install has been modified Code: 20211029 104503 worker: RaspiOS (10.11) An unmodified moOde 7.4.1 would report Code: 20211029 095244 worker: RaspiOS (10.6) Regards, Kent |