+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Play/Pause button using GPIO Mapping (weird behaviour) (/showthread.php?tid=5269)
Play/Pause button using GPIO Mapping (weird behaviour) - seipersei - 12-29-2022
Hi all,
I have a hardware button, wired to GPIO16, that I used as a play/pause button (using the GPIO mapping in Moode’s configuration page, set to Button 1 > Pin 16 > CMD “mpc,toggle”.
The problem I have encountered is that I often need a “double push” in order to play or pause a song. Is this expected behaviour? Can it be tweaked to make it a single push?
Thanks for your help
RE: Play/Pause button using GPIO Mapping (weird behaviour) - kuyadreiph - 06-25-2025
(12-29-2022, 01:01 AM)seipersei Wrote: Hi all,
I have a hardware button, wired to GPIO16, that I used as a play/pause button (using the GPIO mapping in Moode’s configuration page, set to Button 1 > Pin 16 > CMD “mpc,toggle”.
The problem I have encountered is that I often need a “double push” in order to play or pause a song. Is this expected behaviour? Can it be tweaked to make it a single push?
Thanks for your help
Up this thread.
I having a hard time to work with sinlge push button/momentary button to work with play and pause.
Thanks
RE: Play/Pause button using GPIO Mapping (weird behaviour) - the_bertrum - 06-25-2025
I've just tried it with the "push" on my rotary encoder and it works every time. Perhaps you need to increase the debounce time?