+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] Waveshare 6.25 display setup (/showthread.php?tid=7490)
Waveshare 6.25 display setup - Alfred76 - 03-09-2025
Hi All,
Anyone can help on this suiation?
Just building a new moode unit with PI5+ 6.25 inch display (Brand waveshare). All the hardware are done. Now only have one issue, screen and touch rotation not work.... Only can display in vertical
. I had no idea on the code stuff (Sorry!). Anyone can help?Attached the display information...but only have Chinese....
https://www.waveshare.net/wiki/6.25inch_DSI_LCD
Images of the unit:
[attachment=4465]
[attachment=4466]
[attachment=4467]
RE: Waveshare 6.25 display setup - dac2audio - 03-12-2025
(03-09-2025, 08:43 AM)Alfred76 Wrote: Hi All,
Anyone can help on this suiation?
Just building a new moode unit with PI5+ 6.25 inch display (Brand waveshare). All the hardware are done. Now only have one issue, screen and touch rotation not work.... Only can display in vertical
Attached the display information...but only have Chinese....
https://www.waveshare.net/wiki/6.25inch_DSI_LCD
Images of the unit:
Hi Alfred76,
Please check the following forum thread, I used practically the same display (Waveshare also) and faced the same problem...
https://moodeaudio.org/forum/showthread.php?tid=7497
Be careful that mine is a DSI type.
Regards,
Jacques.
RE: Waveshare 6.25 display setup - dac2audio - 03-12-2025
https://www.waveshare.com/6.25inch-DSI-LCD.htm
https://www.waveshare.com/wiki/6.25inch_DSI_LCD
English datasheet is here.
RE: Waveshare 6.25 display setup - Alfred76 - 03-16-2025
(03-12-2025, 07:42 PM)dac2audio Wrote:(03-09-2025, 08:43 AM)Alfred76 Wrote: Hi All,
Anyone can help on this suiation?
Just building a new moode unit with PI5+ 6.25 inch display (Brand waveshare). All the hardware are done. Now only have one issue, screen and touch rotation not work.... Only can display in vertical
Attached the display information...but only have Chinese....
https://www.waveshare.net/wiki/6.25inch_DSI_LCD
Images of the unit:
Hi Alfred76,
Please check the following forum thread, I used practically the same display (Waveshare also) and faced the same problem...
https://moodeaudio.org/forum/showthread.php?tid=7497
Be careful that mine is a DSI type.
Regards,
Jacques.
Hi Jacques,
Thanks for your replied! My 6.25 inch screen are DSI either. Try to follow your method to edit the config.txt, change the parameter inside the moode. But no luck... Is it anything I doing wrong? But I am using Pi5.
[attachment=4490]
[attachment=4491]
[attachment=4493]
[attachment=4492]
RE: Waveshare 6.25 display setup - Alfred76 - 03-18-2025
Finally fixed!!!
Setting with below code & parameter!!
[attachment=4494]
[attachment=4495]
[attachment=4496]
[attachment=4499]
[attachment=4498]
[attachment=4497]
RE: Waveshare 6.25 display setup - the_bertrum - 03-18-2025
All that and you listen to Adele?
It looks very nice. I love the "moOde" case.
RE: Waveshare 6.25 display setup - Alfred76 - 03-18-2025
(03-18-2025, 02:34 PM)the_bertrum Wrote: All that and you listen to Adele?
It looks very nice. I love the "moOde" case.
This is the first version of the 3D print. Next version will implement SSD internally. I can share this case 3D if anyone want it. But this LCD is not standard Raspberry 7". Used adaptor board to change the angle of HDMI and USB C. Will create another 7" LCD case with Pi4.
[attachment=4500]
RE: Waveshare 6.25 display setup - dac2audio - 05-01-2025
(03-18-2025, 01:41 PM)Alfred76 Wrote: Finally fixed!!!Great!! Looks fine!!
Setting with below code & parameter!!
RE: Waveshare 6.25 display setup - Rumbledoor - 05-17-2025
(03-18-2025, 04:00 PM)Alfred76 Wrote:(03-18-2025, 02:34 PM)the_bertrum Wrote: All that and you listen to Adele?
It looks very nice. I love the "moOde" case.
This is the first version of the 3D print. Next version will implement SSD internally. I can share this case 3D if anyone want it. But this LCD is not standard Raspberry 7". Used adaptor board to change the angle of HDMI and USB C. Will create another 7" LCD case with Pi4.
Yes, please. I‘m interested in the 3d files of the case. And may I ask witch loudspeakers you use? These are active ones right?
Greetings