Moode Forum
[SOLVED] ....appear to have 'jumped' to 9.3.0 ....without going through the process! - Printable Version

+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] ....appear to have 'jumped' to 9.3.0 ....without going through the process! (/showthread.php?tid=7541)

....appear to have 'jumped' to 9.3.0 ....without going through the process! - Tonewheelkev - 03-23-2025

On 19th March.....using
Code:
sudo /var/www/util/system-updater.sh moode9

...successfully went from 9.2.5 to 9.2.6 via SSH (Now corrected Smile )

Today....via config..... checked status, and found I'm already on 9.3.0
(Slight refinement here. Check for U/D offerred 'install'....which then didn't go through the usual steps)

Now says "This release is: 9.3.0 2025-03-21"

....which can't be right....surely!!?

RE: ....appear to have 'jumped' to 9.3.0 ....without going through the process! - the_bertrum - 03-24-2025

Not sure what happened for you, but I had two players that appeared to stop mid upgrade to 9.3.0 - the logs just ended at the atheros step. Using the manual script revealed that there were some header generation activities, and the rpi-eeprom upgrade outstanding. I don't know if it is relevant, but the two players that failed also reported that there were installed components that were no longer required and recommended sudo apt autoremove. I've done that now so let's see if that has any effect on the next inplace update.

RE: ....appear to have 'jumped' to 9.3.0 ....without going through the process! - Tim Curtis - 03-24-2025

I've posted a new update zip that does not contain the final autoremove command.

Try manual update again
Code:
sudo /var/www/util/system-updater.sh moode9


RE: ....appear to have 'jumped' to 9.3.0 ....without going through the process! - Tonewheelkev - 03-24-2025

Thanks for that! Can see that the startup log refers to MPD 0.24, and that S/W is up to date.
Is there anything else I need to do please?


20250324 102305 worker: --
20250324 102305 worker: -- Start moOde 9 series
20250324 102305 worker: --
20250324 102305 worker: Daemonize:     complete
20250324 102305 worker: Linux startup: complete
20250324 102305 worker: Boot config:   ok
20250324 102305 worker: Boot folder:   ok
20250324 102305 worker: Radio table:   ok
20250324 102307 worker: PHP session:   cleaned
20250324 102307 worker: PHP session:   loaded
20250324 102311 worker: Package locks: applied
20250324 102312 worker: File check:    complete
20250324 102312 worker: Log to RAM:    on
20250324 102312 worker: Debug logging: off
20250324 102312 worker: --
20250324 102312 worker: -- System
20250324 102312 worker: --
20250324 102313 worker: Host name:     moode
20250324 102313 worker: RPi model:     Pi-4B 1.5 4GB
20250324 102313 worker: moOde release: 9.3.0 2025-03-21
20250324 102313 worker: RaspiOS:       12.6 Bookworm 64-bit
20250324 102313 worker: Linux Kernel:  6.6.74 64-bit
20250324 102313 worker: MPD version:   0.24
20250324 102313 worker: User id:       moodeguest
20250324 102313 worker: Home folder:   /home/moodeguest
20250324 102313 worker: Time zone:     Europe/London
20250324 102313 worker: Kbd layout:    gb
20250324 102313 worker: HDMI ports(s): on
20250324 102313 worker: HDMI-CEC:      off
20250324 102313 worker: Sys LED0:      on
20250324 102313 worker: Sys LED1:      on
20250324 102313 worker: Reduce power:  n/a
20250324 102313 worker: Fan control:   n/a
20250324 102313 worker: CPU governor:  ondemand
20250324 102313 worker: --
20250324 102313 worker: -- Network
20250324 102313 worker: --
20250324 102313 worker: Eth0
20250324 102313 worker: Ethernet: adapter exists
20250324 102313 worker: Ethernet: timeout off
20250324 102313 worker: Ethernet: method  dhcp
20250324 102314 worker: Ethernet: address 192.168.0.11
20250324 102314 worker: Ethernet: netmask 255.255.255.0
20250324 102314 worker: Ethernet: gateway 192.168.0.1
20250324 102314 worker: Ethernet: pri DNS 194.168.4.100
20250324 102314 worker: Ethernet: domain  none found
20250324 102314 worker: Wlan0
20250324 102314 worker: Wireless: adapter does not exist
20250324 102314 worker: mDNS
20250324 102314 worker: Discover: IPv4 and IPv6
20250324 102314 worker: --
20250324 102314 worker: -- File sharing
20250324 102314 worker: --
20250324 102314 worker: SMB file sharing:  on
20250324 102314 worker: SMB password:      none
20250324 102314 worker: NFS file sharing:  off
20250324 102314 worker: DLNA file sharing: off
20250324 102314 worker: --
20250324 102314 worker: -- Special configs
20250324 102314 worker: --
20250324 102314 worker: Plexamp:          not installed
20250324 102314 worker: RoonBridge:       not installed
20250324 102314 worker: Allo Boss 2:      not detected, OLED script ok
20250324 102314 worker: Allo Piano 2.1:   not detected
20250324 102314 worker: IQaudIO DigiAMP+: not detected
20250324 102314 worker: RPi DigiAMP+:     not detected
20250324 102314 worker: Bluetooth:        session vars ok
20250324 102314 worker: --
20250324 102314 worker: -- ALSA debug
20250324 102314 worker: --
20250324 102314 worker: Cards:  0:E30             1:vc4hdmi0        2:vc4hdmi1        3:empty          
20250324 102314 worker:         4:empty           5:empty           6:empty           7:empty          
20250324 102315 worker: Mixers: 0SadE30 )          1:none            2:none            3:none            
20250324 102315 worker:         4:none            5:none            6:none            7:none            
20250324 102315 worker: --
20250324 102315 worker: -- Audio configuration
20250324 102315 worker: --
20250324 102315 worker: Audio device:  0:E30
20250324 102315 worker: ALSA card:     has not been reassigned
20250324 102315 worker: MPD config:    update not needed
20250324 102315 worker: ALSA output:   USB
20250324 102315 worker: ALSA mode:     Direct (hw)
20250324 102315 worker: ALSA mixer:    E30
20250324 102315 worker: ALSA volume:   95% (-6.00dB)
20250324 102315 worker: ALSA maxvol:   80%
20250324 102315 worker: ALSA loopback: off
20250324 102315 worker: MPD mixer      Software
20250324 102315 worker: Integ audio:   vc4-kms-v3d
20250324 102315 worker: Audio formats: S32_LE, SPECIAL, DSD_U32_BE
20250324 102315 worker: CamillaDSP:    off
20250324 102315 worker: CDSP volume:   0dB
20250324 102315 worker: CDSP volrange: 60dB
20250324 102315 worker: --
20250324 102315 worker: -- MPD startup
20250324 102315 worker: --
20250324 102316 worker: MPD service:        started
20250324 102316 worker: MPD port 6600:      accepting connections
20250324 102316 worker: MPD ALSA Default:   on
20250324 102316 worker: MPD ALSA Bluetooth: off
20250324 102316 worker: MPD HTTP Server:    off
20250324 102317 worker: MPD volume:         86
20250324 102317 worker: Saved MPD vol:      -1
20250324 102317 worker: Saved SRC vol:      0
20250324 102317 worker: MPD crossfade:      off
20250324 102317 worker: MPD ignore CUE:     yes
20250324 102317 worker: MPD CDSP volsync:   off
20250324 102317 worker: --
20250324 102317 worker: -- Music sources
20250324 102317 worker: --
20250324 102317 worker: USB drive:      Crucial2TB (ntfs)
20250324 102317 worker: USB drive:      KEVC 128GB (ntfs)
20250324 102317 worker: USB drive:      Kingston1TB (ntfs)
20250324 102317 worker: USB drive:      Trans1TB (ntfs)
20250324 102317 worker: NVMe drives:    none
20250324 102317 worker: SATA drives:    none
20250324 102317 worker: NAS sources:    none
20250324 102317 worker: --
20250324 102317 worker: -- Feature availability
20250324 102317 worker: --
20250324 102317 worker: Input select:    available, Source: MPD, Output: E30
20250324 102317 worker: Bluetooth:       available, PIN: Set, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20250324 102317 worker: AirPlay:         available
20250324 102317 worker: Spotify Connect: available
20250324 102317 worker: Deezer Connect:  available
20250324 102317 worker: Squeezelite:     available
20250324 102317 worker: UPnP client:     available
20250324 102317 worker: Plexamp:         not installed, ALSA maxvol: 65%
20250324 102317 worker: RoonBridge:      not installed
20250324 102317 worker: Multiroom:       available
20250324 102317 worker: GPIO buttons:    available
20250324 102317 worker: Stream recorder: n/a
20250324 102317 worker: --
20250324 102317 worker: -- Security
20250324 102317 worker: --
20250324 102317 worker: Web SSH server:    on
20250324 102317 worker: XSS detection:     off
20250324 102317 worker: HTTPS mode:        available
20250324 102317 worker: --
20250324 102317 worker: -- Peripherals
20250324 102317 worker: --
20250324 102320 worker: Local display:   off
20250324 102320 worker: Chromium ver:    130.0.6723.116-1~deb12u1+rpt1
20250324 102320 worker: Chromium cfg:    WARNING: directory /home/moodeguest/.config does not exist
20250324 102320 worker: Screen blank     600
20250324 102320 worker: On-screen kbd:   off
20250324 102320 worker: Disable GPU:     off
20250324 102320 worker: HDMI orient:     landscape
20250324 102320 worker: HDMI 4K 60Hz:    off
20250324 102320 worker: DSI scn type:    none
20250324 102320 worker: DSI port:        
20250324 102320 worker: DSI brightness:  255
20250324 102320 worker: DSI rotate:      0
20250324 102320 worker: Rotary encoder:  off
20250324 102320 worker: Triggerhappy:    off
20250324 102320 worker: LCD updater:     off
20250324 102320 worker: --
20250324 102320 worker: -- Miscellaneous
20250324 102320 worker: --
20250324 102320 worker: Software update:   Automatic check on
20250324 102320 worker: Software update:   Checking for available update...
20250324 102320 worker: Software update:   Software is up to date
20250324 102320 worker: Auto-CoverView:    off
20250324 102320 worker: CoverView timeout: Never
20250324 102320 worker: Auto-shuffle:      off
20250324 102320 worker: Auto-play:         off
20250324 102320 worker: Maintenance task:  360 mins
20250324 102320 worker: Current view:      reset to Playback
20250324 102320 worker: Active flags:      all false
20250324 102320 worker: Reset flags:       skipped
20250324 102320 worker: Session check:     ok
20250324 102320 worker: --
20250324 102320 worker: -- Startup complete
20250324 102320 worker: --
20250324 102321 worker: Mount monitor:    off
20250324 102321 worker: Radio monitor:    off
20250324 102321 worker: Watchdog monitor: started
20250324 102321 worker: Responsiveness:   Default
20250324 102321 worker: Ready

RE: ....appear to have 'jumped' to 9.3.0 ....without going through the process! - Tim Curtis - 03-24-2025

The startup log looks ok.

You may also want to check the updater log
Code:
cat /var/log/moode_update.log


RE: ....appear to have 'jumped' to 9.3.0 ....without going through the process! - Tonewheelkev - 03-24-2025

(03-24-2025, 11:49 AM)Tim Curtis Wrote: The startup log looks ok.

You may also want to check the updater log
Code:
cat /var/log/moode_update.log

....Here t'is :

cat /var/log/moode_update.log
20250324 102120 updater: Start 2025-03-21 update for moOde
20250324 102120 updater: ** Step 01-35: Remove package hold
20250324 102120 updater: ** Step 02-35: Update package list
20250324 102126 updater: ** Step 03-35: Update Linux kernel to 6.6.74
20250324 102126 updater: ** - Kernel is current, no update required
20250324 102126 updater: ** Step 04-35: Install moode-player=9.3.0-1moode1
20250324 102128 updater: ** Step 05-35: Install alsa-cdsp=1.2.0-2moode1
20250324 102130 updater: ** Step 06-35: Install mpd=0.24-1moode1
20250324 102133 updater: ** Step 07-35: Install mpc=0.35-1moode1
20250324 102135 updater: ** Step 08-35: Install bluez-alsa-utils=4.2.0-2moode1
20250324 102137 updater: ** Step 09-35: Install libasound2-plugin-bluez=4.2.0-2moode1
20250324 102139 updater: ** Step 10-35: Install camilladsp=3.0.0-1moode1
20250324 102141 updater: ** Step 11-35: Install camillagui=3.0.2-1moode1
20250324 102143 updater: ** Step 12-35: Install mpd2cdspvolume=2.0.0-1moode2
20250324 102145 updater: ** Step 13-35: Install python3-camilladsp-plot=3.0.0-1moode1
20250324 102148 updater: ** Step 14-35: Install python3-camilladsp=3.0.0-1moode1
20250324 102150 updater: ** Step 15-35: Install shairport-sync=4.3.6-1moode1
20250324 102152 updater: ** Step 16-35: Install log2ram=1.7.2
20250324 102154 updater: ** Step 17-35: Install librespot=0.6.0-1moode1
20250324 102156 updater: ** Step 18-35: Install libnpupnp13=6.2.0-1moode1
20250324 102158 updater: ** Step 19-35: Install libupnpp16=0.26.7-1moode1
20250324 102200 updater: ** Step 20-35: Install pleezer=0.13.0-1moode1
20250324 102203 updater: ** Step 21-35: Install upmpdcli=1.9.0-1moode1
20250324 102205 updater: ** Step 22-35: Install upmpdcli-qobuz=1.9.0-1moode1
20250324 102207 updater: ** Step 23-35: Install upmpdcli-tidal=1.9.0-1moode1
20250324 102209 updater: ** Step 24-35: Install bluez-firmware
20250324 102211 updater: ** Step 25-35: Install firmware-atheros
20250324 102213 updater: ** Step 26-35: Install firmware-brcm80211
20250324 102216 updater: ** Step 27-35: Install firmware-libertas
20250324 102218 updater: ** Step 28-35: Install firmware-linux-free
20250324 102220 updater: ** Step 29-35: Install firmware-misc-nonfree
20250324 102222 updater: ** Step 30-35: Install firmware-realtek
20250324 102224 updater: ** Step 31-35: Install raspi-firmware
20250324 102226 updater: ** Step 32-35: Install rpi-eeprom
20250324 102228 updater: ** Step 33-35: Apply package hold
20250324 102229 updater: ** Step 34-35: Post-install cleanup
20250324 102229 updater: ** - Restore theme color
20250324 102229 updater: ** - Remove unneeded APT archive files
20250324 102229 updater: ** - Reset Bluetooth PIN code if indicated
20250324 102229 updater: ** Step 35-35: Sync changes to disk
20250324 102229 updater: Finish 2025-03-21 update for moOde
20250324 102229 updater: Update installed, restart required

RE: ....appear to have 'jumped' to 9.3.0 ....without going through the process! - Tim Curtis - 03-24-2025

(03-24-2025, 12:05 PM)Tonewheelkev Wrote:
(03-24-2025, 11:49 AM)Tim Curtis Wrote: The startup log looks ok.

You may also want to check the updater log
Code:
cat /var/log/moode_update.log

....Here t'is :

cat /var/log/moode_update.log
20250324 102120 updater: Start 2025-03-21 update for moOde
20250324 102120 updater: ** Step 01-35: Remove package hold
20250324 102120 updater: ** Step 02-35: Update package list
20250324 102126 updater: ** Step 03-35: Update Linux kernel to 6.6.74
20250324 102126 updater: ** - Kernel is current, no update required
20250324 102126 updater: ** Step 04-35: Install moode-player=9.3.0-1moode1
20250324 102128 updater: ** Step 05-35: Install alsa-cdsp=1.2.0-2moode1
20250324 102130 updater: ** Step 06-35: Install mpd=0.24-1moode1
20250324 102133 updater: ** Step 07-35: Install mpc=0.35-1moode1
20250324 102135 updater: ** Step 08-35: Install bluez-alsa-utils=4.2.0-2moode1
20250324 102137 updater: ** Step 09-35: Install libasound2-plugin-bluez=4.2.0-2moode1
20250324 102139 updater: ** Step 10-35: Install camilladsp=3.0.0-1moode1
20250324 102141 updater: ** Step 11-35: Install camillagui=3.0.2-1moode1
20250324 102143 updater: ** Step 12-35: Install mpd2cdspvolume=2.0.0-1moode2
20250324 102145 updater: ** Step 13-35: Install python3-camilladsp-plot=3.0.0-1moode1
20250324 102148 updater: ** Step 14-35: Install python3-camilladsp=3.0.0-1moode1
20250324 102150 updater: ** Step 15-35: Install shairport-sync=4.3.6-1moode1
20250324 102152 updater: ** Step 16-35: Install log2ram=1.7.2
20250324 102154 updater: ** Step 17-35: Install librespot=0.6.0-1moode1
20250324 102156 updater: ** Step 18-35: Install libnpupnp13=6.2.0-1moode1
20250324 102158 updater: ** Step 19-35: Install libupnpp16=0.26.7-1moode1
20250324 102200 updater: ** Step 20-35: Install pleezer=0.13.0-1moode1
20250324 102203 updater: ** Step 21-35: Install upmpdcli=1.9.0-1moode1
20250324 102205 updater: ** Step 22-35: Install upmpdcli-qobuz=1.9.0-1moode1
20250324 102207 updater: ** Step 23-35: Install upmpdcli-tidal=1.9.0-1moode1
20250324 102209 updater: ** Step 24-35: Install bluez-firmware
20250324 102211 updater: ** Step 25-35: Install firmware-atheros
20250324 102213 updater: ** Step 26-35: Install firmware-brcm80211
20250324 102216 updater: ** Step 27-35: Install firmware-libertas
20250324 102218 updater: ** Step 28-35: Install firmware-linux-free
20250324 102220 updater: ** Step 29-35: Install firmware-misc-nonfree
20250324 102222 updater: ** Step 30-35: Install firmware-realtek
20250324 102224 updater: ** Step 31-35: Install raspi-firmware
20250324 102226 updater: ** Step 32-35: Install rpi-eeprom
20250324 102228 updater: ** Step 33-35: Apply package hold
20250324 102229 updater: ** Step 34-35: Post-install cleanup
20250324 102229 updater: ** - Restore theme color
20250324 102229 updater: ** - Remove unneeded APT archive files
20250324 102229 updater: ** - Reset Bluetooth PIN code if indicated
20250324 102229 updater: ** Step 35-35: Sync changes to disk
20250324 102229 updater: Finish 2025-03-21 update for moOde
20250324 102229 updater: Update installed, restart required

Looking good :-)