+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: Audiophile (https://moodeaudio.org/forum/forumdisplay.php?fid=32)
+--- Forum: Audio gear (https://moodeaudio.org/forum/forumdisplay.php?fid=10)
+--- Thread: DIY moode player with screen!! (/showthread.php?tid=7597)
DIY moode player with screen!! - Alfred76 - 04-03-2025
DIY 2 moode players with screen!! 3D print the main housing!!
The 6.25 inch version done!
[attachment=4547]
[attachment=4546]
[attachment=4545]
6.25inch DSI Capacitive Touch Display, 720 × 1560, IPS, Optical Bonding Toughened Glass Panel, DSI Interface, 5-Point Touch | 6.25inch DSI LCD
7 inch are still in development!! Design with GPIO buttons & light!!
7inch DSI Capacitive Touch Display, 1280 × 800, IPS, Optical Bonding Toughened Glass Panel, DSI Interface, 10-Point Touch | 7inch DSI LCD (E)
[attachment=4548]
RE: DIY moode player with screen!! - the_bertrum - 04-03-2025
Things of beauty indeed.
What screen do they need?
RE: DIY moode player with screen!! - Alfred76 - 04-05-2025
(04-03-2025, 02:51 PM)the_bertrum Wrote: Things of beauty indeed.
What screen do they need?
And update with GPIO buttons & light!!
[attachment=4551]
[attachment=4552]
RE: DIY moode player with screen!! - Alfred76 - 04-20-2025
7" version done finally!!
[attachment=4619]
[attachment=4620]
[attachment=4621]
[attachment=4622]
RE: DIY moode player with screen!! - Rumbledoor - 05-15-2025
Wow, stunning!
Would you provide us the stl files? Or are they already somewhere for download?
Thanks and greetings!
RE: DIY moode player with screen!! - Alfred76 - 05-15-2025
(05-15-2025, 05:34 AM)Rumbledoor Wrote: Wow, stunning!
Would you provide us the stl files? Or are they already somewhere for download?
Thanks and greetings!
Which one you prefer? One of them are used Pi5 with extend USB port.
[attachment=4705]
RE: DIY moode player with screen!! - Alfred76 - 05-18-2025
(05-15-2025, 03:14 PM)Alfred76 Wrote:(05-15-2025, 05:34 AM)Rumbledoor Wrote: Wow, stunning!
Would you provide us the stl files? Or are they already somewhere for download?
Thanks and greetings!
Which one you prefer? One of them are used Pi5 with extend USB port.
7 Inch version (modified without using magnet)
[attachment=4715]
[attachment=4716]
The 3D print file is based on the customization parts on the below:
1. 7 inch touch screen
[attachment=4708]
微雪 树莓派4B/5 7寸DSI接口 IPS高清显示屏 电容触控屏 十点触摸-淘宝网
2. Pi4
3. 7 functions PCB for control (Only use 5 switches)
[attachment=4709]
用于ARM树莓派单片机配件摇杆按键模块输出数字电平控制器-淘宝网
4. 20mm Connection cable
[attachment=4710]
26AWG硅胶线杜邦线10cm20cm30cm母对母公对母公对公1007#24端子线-淘宝网
5. 2.5mm width LED light strip
[attachment=4711]
沙盘模型玩具灯条led灯组2.5mm宽超细可裁剪3v5v12v电池usb窄灯带-淘宝网
6 M2.5x8 & M2.5x10 screw
7. 3D print housing
All the above parts from Waveshare & Taobao China
I am using Bambu Lab A1 3D printer with different colors PLA materials.
[attachment=4712]
[attachment=4713]
[attachment=4714]