Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


ian canada
#1
i just finish  built my a fifopi q7 with a hdmipi pro II   eash plug  on 3.3volt and 5 volt  respectively ,  i have install the good output in moode  : ian canada (i2s-dac)  the x01  or x02  green led is good when playing 44.1 or 48  , if i play someting on moode audio , it show me playback but i have no sound  and try 4 different hdmi cable  ,  i wandering if it is not the i2s pinout thing
Reply
#2
Reboot and then post the entire contents of the startup log so people can better understand your configuration.

The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#3
excuse my dummy question but how i i copy the result , i mean i get the result but now how i copy it in the forum thanks
Reply
#4
Code:
20250624 150050 worker: --
20250624 150050 worker: -- Start moOde 9 series
20250624 150050 worker: --
20250624 150050 worker: Daemonize:     complete
20250624 150050 worker: Linux startup: complete
20250624 150050 worker: Boot config:   ok
20250624 150050 worker: Boot folder:   ok
20250624 150050 worker: Radio table:   ok
20250624 150052 worker: PHP session:   cleaned
20250624 150052 worker: PHP session:   loaded
20250624 150053 worker: Package locks: applied
20250624 150054 worker: File check:    complete
20250624 150054 worker: Log to RAM:    on
20250624 150054 worker: Tmp to RAM:    on
20250624 150054 worker: Debug logging: off
20250624 150054 worker: --
20250624 150054 worker: -- System
20250624 150054 worker: --
20250624 150056 worker: Host name:     moode
20250624 150056 worker: RPi model:     Pi-4B 1.5 2GB
20250624 150056 worker: moOde release: 9.3.3 2025-04-29
20250624 150056 worker: RaspiOS:       12.10 Bookworm 64-bit
20250624 150056 worker: Linux Kernel:  6.12.20 64-bit
20250624 150056 worker: MPD version:   0.24.3
20250624 150056 worker: User id:       admin
20250624 150056 worker: Home folder:   /home/admin
20250624 150056 worker: Time zone:     America/Montreal
20250624 150056 worker: Kbd layout:    us
20250624 150056 worker: HDMI ports(s): on
20250624 150056 worker: HDMI-CEC:      off
20250624 150056 worker: Sys LED0:      on
20250624 150056 worker: Sys LED1:      on
20250624 150056 worker: Reduce power:  n/a
20250624 150056 worker: Fan control:   n/a
20250624 150056 worker: CPU governor:  ondemand
20250624 150056 worker: --
20250624 150056 worker: -- Network
20250624 150056 worker: --
20250624 150056 worker: Eth0
20250624 150056 worker: Ethernet: adapter exists
20250624 150056 worker: Ethernet: timeout off
20250624 150056 worker: Ethernet: method  static
20250624 150056 worker: Ethernet: address 192.168.1.41
20250624 150056 worker: Ethernet: netmask 255.255.255.0
20250624 150056 worker: Ethernet: gateway 192.168.1.1
20250624 150056 worker: Ethernet: pri DNS 192.168.1.1
20250624 150056 worker: Ethernet: domain  none found
20250624 150056 worker: Wlan0
20250624 150056 worker: Wireless: adapter exists
20250624 150056 worker: Wireless: country US
20250624 150056 worker: Wireless: SSID    None
20250624 150056 worker: Wireless: other   None
20250624 150056 worker: mDNS
20250624 150056 worker: Discover: IPv4 and IPv6
20250624 150056 worker: --
20250624 150056 worker: -- File sharing
20250624 150056 worker: --
20250624 150057 worker: SMB file sharing:  on
20250624 150057 worker: SMB password:      none
20250624 150057 worker: NFS file sharing:  off
20250624 150057 worker: DLNA file sharing: off
20250624 150057 worker: --
20250624 150057 worker: -- Special configs
20250624 150057 worker: --
20250624 150057 worker: Plexamp:          not installed
20250624 150057 worker: RoonBridge:       not installed
20250624 150057 worker: Allo Boss 2:      not detected, OLED script ok
20250624 150057 worker: Allo Piano 2.1:   not detected
20250624 150057 worker: IQaudIO DigiAMP+: not detected
20250624 150057 worker: RPi DigiAMP+:     not detected
20250624 150057 worker: Bluetooth:        session vars ok
20250624 150057 worker: --
20250624 150057 worker: -- ALSA debug
20250624 150057 worker: --
20250624 150057 worker: Cards:  0:sndrpirpidac    1:vc4hdmi0        2:vc4hdmi1        3:empty          
20250624 150057 worker:         4:empty           5:empty           6:empty           7:empty          
20250624 150057 worker: Mixers: 0:none            1:none            2:none            3:none            
20250624 150057 worker:         4:none            5:none            6:none            7:none            
20250624 150057 worker: --
20250624 150057 worker: -- Audio configuration
20250624 150057 worker: --
20250624 150057 worker: Audio device:  0:Generic-I2S (i2s-dac)
20250624 150057 worker: ALSA card:     has not been reassigned
20250624 150057 worker: MPD config:    update not needed
20250624 150057 worker: ALSA output:   I2S
20250624 150057 worker: ALSA mode:     Default (plughw)
20250624 150057 worker: ALSA mixer:    none exists
20250624 150101 worker: ALSA volume:   controller not detected
20250624 150101 worker: ALSA maxvol:   100%
20250624 150101 worker: ALSA loopback: off
20250624 150101 worker: MPD mixer      Software
20250624 150101 worker: Integ audio:   vc4-kms-v3d
20250624 150101 worker: Audio formats: S16_LE, S24_LE
20250624 150101 worker: CamillaDSP:    off
20250624 150101 worker: CDSP volume:   0dB
20250624 150101 worker: CDSP volrange: 60dB
20250624 150101 worker: --
20250624 150101 worker: -- MPD startup
20250624 150101 worker: --
20250624 150101 worker: MPD service:        started
20250624 150101 worker: MPD port 6600:      accepting connections
20250624 150101 worker: MPD ALSA Default:   on
20250624 150101 worker: MPD ALSA Bluetooth: off
20250624 150101 worker: MPD HTTP Server:    off
20250624 150101 worker: MPD volume:         29
20250624 150101 worker: Saved MPD vol:      -1
20250624 150101 worker: Saved SRC vol:      0
20250624 150101 worker: MPD crossfade:      off
20250624 150101 worker: MPD ignore CUE:     yes
20250624 150101 worker: MPD CDSP volsync:   off
20250624 150101 worker: --
20250624 150101 worker: -- Music sources
20250624 150101 worker: --
20250624 150101 worker: USB drive:      New Volume (ntfs)
20250624 150101 worker: NVMe drives:    none
20250624 150101 worker: SATA drives:    none
20250624 150101 worker: NAS sources:    none
20250624 150101 worker: --
20250624 150101 worker: -- Feature availability
20250624 150101 worker: --
20250624 150101 worker: Input select:    available, Source: MPD, Output: Generic-I2S (i2s-dac)
20250624 150101 worker: Bluetooth:       available, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20250624 150101 worker: AirPlay:         available
20250624 150101 worker: Spotify Connect: available
20250624 150101 worker: Deezer Connect:  available
20250624 150101 worker: Squeezelite:     available
20250624 150101 worker: UPnP client:     available
20250624 150101 worker: Plexamp:         not installed, ALSA maxvol: 100%
20250624 150101 worker: RoonBridge:      not installed
20250624 150101 worker: Multiroom:       available
20250624 150101 worker: GPIO buttons:    available
20250624 150101 worker: Stream recorder: n/a
20250624 150101 worker: --
20250624 150101 worker: -- Security
20250624 150101 worker: --
20250624 150101 worker: Web SSH server:    off
20250624 150101 worker: XSS detection:     off
20250624 150101 worker: HTTPS mode:        available
20250624 150101 worker: --
20250624 150101 worker: -- Peripherals
20250624 150101 worker: --
20250624 150103 worker: Local display:   on
20250624 150103 worker: Chromium ver:    126.0.6478.164-rpt1
20250624 150103 worker: Chromium cfg:    directory ok
20250624 150103 worker: Screen blank     600
20250624 150103 worker: On-screen kbd:   off
20250624 150103 worker: Disable GPU:     off
20250624 150103 worker: HDMI orient:     portrait
20250624 150103 worker: HDMI 4K 60Hz:    off
20250624 150103 worker: DSI scn type:    none
20250624 150103 worker: DSI port:        1
20250624 150103 worker: DSI brightness:  255
20250624 150103 worker: DSI rotate:      0
20250624 150103 worker: Rotary encoder:  off
20250624 150103 worker: Triggerhappy:    off
20250624 150103 worker: LCD updater:     off
20250624 150103 worker: --
20250624 150103 worker: -- Miscellaneous
20250624 150103 worker: --
20250624 150103 worker: Software update:   Automatic check off
20250624 150103 worker: Auto-CoverView:    off
20250624 150103 worker: CoverView timeout: Never
20250624 150103 worker: Auto-shuffle:      off
20250624 150103 worker: Auto-play:         off
20250624 150103 worker: Maintenance task:  360 mins
20250624 150103 worker: Current view:      reset to Playback
20250624 150103 worker: Active flags:      all false
20250624 150103 worker: Reset flags:       skipped
20250624 150103 worker: Session check:     ok
20250624 150103 worker: --
20250624 150103 worker: -- Startup complete
20250624 150103 worker: --
20250624 150103 worker: Mount monitor:    started
20250624 150103 worker: Radio monitor:    off
20250624 150103 worker: Watchdog monitor: started
20250624 150103 worker: Responsiveness:   Default
20250624 150103 worker: Ready
here is the result log
Reply
#5
I don't see anything suspicious in the log.

Generic-I2S (i2s-dac) and IanCanada (i2s-dac) both load the exact same i2s-dac passive mode driver which I believe is correct for this board.

What device is it connected to?
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#6
(06-24-2025, 09:01 PM)Tim Curtis Wrote: I don't see anything suspicious in the log.

Generic-I2S (i2s-dac) and IanCanada (i2s-dac) both load the exact same i2s-dac passive mode driver which I believe is correct for this board.

What device is it connected to?

a connect to a denafrips aries 15th  , i know the audio work , if i chose usb  for my pc  i hear  perfectly the sound   , i  asume it is maybe un trouble  with the i2s pinout  or the hdmi cable   which  i thinks is more the pinout   anyway i send a email to ian canada   without succes , the guy sais he have all the same with the same dac  and waiting  for an answer from denafrips ,   it is not a dac very user friendly
Reply
#7
The manual has a settings table that includes the Denefrips
https://github.com/iancanada/DocumentDow...Manual.pdf
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#8
well the thing i have to try is to use those dip switch on hdmipi pro mk2 as i have already read this document when i buy the product and it it is write the default settings of these dip switch is ps audio format and i have a denafrips ares 15th which is not use the ps audio format , it is the only explenation i can find , i try ps audio format on i2s pinout setting of the denafrips ares 15th but without succes maybe i forgot someting in moode
Reply
#9
It is to be expected, as the i2s thing was never thought to be used among (between, TBH) devices, but only on-board, between (among?) chips.
So a standard pinout for a cable, such as an hdmi one, was never thought in the first place, because it was not the use-case the interface was meant to use.
Annoying, I know, but... it is what it is.
A good thing is, that some manufacturers do provide their pinout, so that you may have a choice to get it working, more or less out-of-the-box.
Reply


Forum Jump: