[PROBLEM] MoOde freezes, config pages won't load

[baoverulk]

As a note, I can reproduce this on Pi5 with a new high quality sd card.
I have stopped debugging this for now and will focus on listening to music on MoOde 8 (I also run MoOde 9 on Pi Zero 2 W without dsp in another room with no problems). If somebody else has the same problem, hopefully they find this thread and add to it.

[the_bertrum]

Code:

20240709 221140 worker: --
20240709 221140 worker: -- Start moOde 9 series
20240709 221140 worker: --
20240709 221140 worker: Successfully daemonized
20240709 221140 worker: Wait for Linux startup
20240709 221146 worker: Linux startup complete
20240709 221146 worker: Boot config is ok
20240709 221146 worker: Session loaded
20240709 221148 worker: Package locks applied
20240709 221148 worker: File check complete
20240709 221148 worker: Debug logging off
20240709 221148 worker: --
20240709 221148 worker: -- System
20240709 221148 worker: --
20240709 221149 worker: Host name:     straum
20240709 221149 worker: RPi model:     Pi-5B 1.0 8GB
20240709 221149 worker: moOde release: 9.0.4 2024-07-06
20240709 221149 worker: RaspiOS:       12.5 Bookworm 64-bit
20240709 221149 worker: Linux Kernel:  6.6.31 64-bit
20240709 221149 worker: MPD version:   0.23.14
20240709 221149 worker: User id:       k
20240709 221149 worker: Home folder:   /home/k
20240709 221149 worker: Time zone:     Atlantic/Reykjavik
20240709 221149 worker: Kbd layout:    us
20240709 221149 worker: HDMI ports(s): on
20240709 221149 worker: Sys LED0:      on
20240709 221149 worker: Sys LED1:      on
20240709 221149 worker: Reduce power:  off
20240709 221149 worker: CPU governor:  ondemand
20240709 221149 worker: Integ audio:   vc4-kms-v3d
20240709 221149 worker: --
20240709 221149 worker: -- Network
20240709 221149 worker: --
20240709 221149 worker: Eth0
20240709 221149 worker: Ethernet: adapter exists
20240709 221149 worker: Ethernet: timeout off
20240709 221149 worker: Ethernet: address not assigned
20240709 221149 worker: Wlan0
20240709 221149 worker: Wireless: adapter exists
20240709 221149 worker: Wireless: country DE
20240709 221149 worker: Wireless: SSID    N100 5.0
20240709 221149 worker: Wireless: other   None
20240709 221149 worker: Wireless: timeout up to 90 secs
20240709 221149 worker: Wireless: connect to N100 5.0
20240709 221149 worker: Wireless: method  dhcp
20240709 221149 worker: Wireless: address 192.168.1.251
20240709 221149 worker: Wireless: netmask 255.255.255.0
20240709 221149 worker: Wireless: gateway 192.168.1.1
20240709 221149 worker: Wireless: pri DNS 192.168.1.41
20240709 221149 worker: Wireless: domain  N100-BEINIR
20240709 221149 worker: --
20240709 221149 worker: -- File sharing
20240709 221149 worker: --
20240709 221149 worker: SMB file sharing:  off
20240709 221149 worker: NFS file sharing:  off
20240709 221149 worker: DLNA file sharing: off
20240709 221149 worker: --
20240709 221149 worker: -- Special configs
20240709 221149 worker: --
20240709 221149 worker: Plexamp:          not installed
20240709 221149 worker: RoonBridge:       not installed
20240709 221149 worker: Allo Piano 2.1:   not detected
20240709 221149 worker: Allo Boss 2:      not detected, OLED script ok
20240709 221149 worker: IQaudIO AMP*:     not detected
20240709 221149 worker: --
20240709 221149 worker: -- ALSA debug
20240709 221149 worker: --
20240709 221149 worker: Cards:  0:vc4hdmi0        1:vc4hdmi1        2:empty           3:empty          
20240709 221149 worker:         4:empty           5:empty           6:empty           7:empty          
20240709 221149 worker: Mixers: 0:none            1:none            2:none            3:none            
20240709 221149 worker:         4:none            5:none            6:none            7:none            
20240709 221149 worker: --
20240709 221149 worker: -- Audio configuration
20240709 221149 worker: --
20240709 221149 worker: Audio device:  0:Pi HDMI 1
20240709 221150 worker: ALSA card:     has not been reassigned

If that's the whole of your startup log then something is very broken it should end with a "Startup Complete" section.

[PJVervoorn]

Code:

20240709 221149 worker: Audio device:  0:Pi HDMI 1
20240709 221150 worker: ALSA card:     has not been reassigned

If that's the whole of your startup log then something is very broken it should end with a "Startup Complete" section.

I’m experiencing the same (on a RPi 3+A, running 9.0.4), log stops at the exact same line.
I think it happened after changing volume to Fixed 0dB.


I’ll rewrite the SD, try again and post my findings.

[PJVervoorn]

I created a new SD, it stops at a different location:

Code:

20240718 154636 worker: --
20240718 154636 worker: -- Start moOde 9 series
20240718 154636 worker: --
20240718 154636 worker: Successfully daemonized
20240718 154636 worker: Wait for Linux startup
20240718 154643 worker: Linux startup complete
20240718 154643 worker: Boot config is ok
20240718 154643 worker: Session loaded
20240718 154646 worker: Package locks applied
20240718 154648 worker: File check complete
20240718 154648 worker: Debug logging off
20240718 154648 worker: --
20240718 154648 worker: -- System
20240718 154648 worker: --
20240718 154652 worker: Host name:     moode
20240718 154652 worker: RPi model:     Pi-Zero 2 W 1.0 512MB
20240718 154652 worker: moOde release: 9.0.4 2024-07-06
20240718 154652 worker: RaspiOS:       12.6 Bookworm 64-bit
20240718 154652 worker: Linux Kernel:  6.6.31 64-bit
20240718 154652 worker: MPD version:   0.23.14
20240718 154652 worker: User id:       peter
20240718 154652 worker: Home folder:   /home/peter
20240718 154652 worker: Time zone:     Asia/Bangkok
20240718 154652 worker: Kbd layout:    us
20240718 154652 worker: HDMI ports(s): on
20240718 154652 worker: Sys LED0:      on
20240718 154652 worker: Sys LED1:      sysclass does not exist
20240718 154652 worker: Reduce power:  n/a
20240718 154652 worker: CPU governor:  ondemand
20240718 154652 worker: Integ audio:   vc4-kms-v3d
20240718 154652 worker: --
20240718 154652 worker: -- Network
20240718 154652 worker: --
20240718 154652 worker: Eth0
20240718 154652 worker: Ethernet: adapter does not exist
20240718 154652 worker: Wlan0
20240718 154653 worker: Wireless: adapter exists
...
20240718 154653 worker: Wireless: domain  internal
20240718 154653 worker: --
20240718 154653 worker: -- File sharing
20240718 154653 worker: --
20240718 154653 worker: SMB file sharing:  off
20240718 154653 worker: NFS file sharing:  off
20240718 154653 worker: DLNA file sharing: off
20240718 154653 worker: --
20240718 154653 worker: -- Special configs
20240718 154653 worker: --
20240718 154653 worker: Plexamp:          not installed
20240718 154653 worker: RoonBridge:       not installed
20240718 154653 worker: Allo Piano 2.1:   not detected
20240718 154653 worker: Allo Boss 2:      not detected, OLED script ok
20240718 154653 worker: IQaudIO AMP*:     not detected
20240718 154653 worker: --
20240718 154653 worker: -- ALSA debug
20240718 154653 worker: --
20240718 154653 worker: Cards:  0:vc4hdmi         1:BossDAC         2:empty           3:empty          
20240718 154653 worker:         4:empty           5:empty           6:empty           7:empty          
20240718 154654 worker: Mixers: 0:none            1:(Digital)       2:none            3:none            
20240718 154654 worker:         4:none            5:none            6:none            7:none            
20240718 154654 worker: --
20240718 154654 worker: -- Audio configuration
20240718 154654 worker: --
20240718 154654 worker: Audio device:  1:Allo MiniBoss DAC
20240718 154654 worker: ALSA card:     has not been reassigned
20240718 154654 worker: MPD config:    update not needed
20240718 154654 worker: ALSA output:   I2S
20240718 154654 worker: ALSA mode:     Default (plughw)
20240718 154654 worker: ALSA mixer     Digital
20240718 154655 worker: ALSA volume:   100% (0.00dB)
20240718 154655 worker: ALSA maxvol:   100%
20240718 154655 worker: ALSA loopback: off
20240718 154655 worker: MPD mixer      Hardware
20240718 154655 worker: Audio formats: S16_LE, S24_LE, S32_LE

(It is a Zero2 W, not a 3+A)
Perhaps the order in which I made the changes is different, I will try again...

[PJVervoorn]

I have tried a few more times.
Like OP, it seems the problem occurs when Camilla DSP is activated.
As long as I don’t activate Camilla, pages like “snd-config.php” keep working.

After uploading my yml file (downloaded from 8.3.9) and enabling that, I get an empty page.
When I then reboot and change the volume to Camilla DSP from that moment the pages time out and moodeutl -l doesn’t show a complete start anymore.

Another (unrelated) issue: the Chip settings for my Mini BOSS don’t work anymore.
I used to set Analog Gain to -6dB to have a better range of my pre amp's volume dial.

[the_bertrum]

Can you post a startup log with Camilla off please so we can see what a full boot looks like on your system?

[PJVervoorn]

@“baoverulk”: It seems the pages can load again after changing the Camilla DSP to off (using the Equalizer symbol in the main page.)
Then reboot via SSH

[jit-010101]

@“baoverulk”: It seems the pages can load again after changing the Camilla DSP to off (using the Equalizer symbol in the main page.)
Then reboot via SSH

With my setup I noticed two things:

1. dont flash the images with anything else then raspi imager (so no 'dd') - otherwise it will work but after the first config change the UI will become unresponsive. This seems related to how the configuration defaults are (not)  written (which changed a bit under the hood in recent version).

2. Chrome on Linux seems to have a bug related to session management. Sometimes it will lead to a state where it occurs that the UI is frozen and a reload doesnt really help (not even a new tab). This does not occur on Edge for example.

[PJVervoorn]

Can you post a startup log with Camilla off please so we can see what a full boot looks like on your system?

Hi, sorry for the late response, I was away.


@moode:~ $ moodeutl -l

Code:

[color=#262626][size=small][font=Monaco]20240726 142626 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142626 worker: -- Start moOde 9 series[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142626 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142626 worker: Successfully daemonized[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142626 worker: Wait for Linux startup[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142632 worker: Linux startup complete[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142632 worker: Boot config is ok[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142633 worker: Session loaded[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142642 worker: Package locks applied[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142643 worker: File check complete[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142643 worker: Debug logging off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142643 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142643 worker: -- System[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142643 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142648 worker: Host name:     moode[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142648 worker: RPi model:     Pi-Zero 2 W 1.0 512MB[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: moOde release: 9.0.4 2024-07-06[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: RaspiOS:       12.6 Bookworm 64-bit[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Linux Kernel:  6.6.31 64-bit[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: MPD version:   0.23.14[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: User id:       peter[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Home folder:   /home/peter[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Time zone:     Asia/Bangkok[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Kbd layout:    us[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: HDMI ports(s): on[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Sys LED0:      on[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Sys LED1:      sysclass does not exist[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Reduce power:  n/a[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: CPU governor:  ondemand[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Integ audio:   vc4-kms-v3d[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: -- Network[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142700 worker: Eth0[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Ethernet: adapter does not exist[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Wlan0[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Wireless: adapter exists[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Wireless: <snip/>[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: -- File sharing[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: SMB file sharing:  off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: NFS file sharing:  off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: DLNA file sharing: off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: -- Special configs[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Plexamp:          not installed[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: RoonBridge:       not installed[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Allo Piano 2.1:   not detected[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Allo Boss 2:      not detected, OLED script ok[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: IQaudIO AMP*:     not detected[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: -- ALSA debug[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker: Cards:  0:vc4hdmi         1:BossDAC         2:empty           3:empty           [/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142701 worker:         4:empty           5:empty           6:empty           7:empty           [/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: Mixers: 0:none            1:(Digital)       2:none            3:none            [/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker:         4:none            5:none            6:none            7:none            [/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: -- Audio configuration[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: Audio device:  1:Allo MiniBoss DAC[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: ALSA card:     has not been reassigned[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: MPD config:    update not needed[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: ALSA output:   I2S[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: ALSA mode:     Default (plughw)[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142702 worker: ALSA mixer     Digital[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: ALSA volume:   100% (0.00dB)[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: ALSA maxvol:   100%[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: ALSA loopback: off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: MPD mixer      Fixed (0dB)[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: Audio formats: S16_LE, S24_LE, S32_LE[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: CamillaDSP:    off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: CDSP volume:   0dB[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: CDSP volrange: 60dB[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: -- MPD startup[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142703 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD service:        started[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD port 6600:      accepting connections[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD ALSA Default:   on[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD ALSA Bluetooth: off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD HTTP Server:    off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD volume:         100[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Saved MPD vol:      -1[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Saved SRC vol:      0[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD crossfade:      off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD ignore CUE:     no[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: MPD CDSP volsync:   off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: -- Music sources[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: USB drive:      EFI[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: USB drive:      SamsungT3[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: NAS sources:    no music sources defined[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: -- Feature availability[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Input select:    available, Source: MPD, Output: Allo MiniBoss DAC[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Bluetooth:       available, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: AirPlay:         available[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Spotify Connect: available[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Squeezelite:     available[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: UPnP client:     available[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Plexamp:         not installed[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: RoonBridge:      not installed[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Multiroom:       available[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: GPIO buttons:    available[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: HTTPS mode:      available[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: Stream recorder: n/a[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: -- Peripherals[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142705 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Local display:   off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: On-screen kbd:   off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: HDMI 4K 60Hz:    off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Rotary encoder:  off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: USB volume knob: off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: LCD updater:     off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: -- Miscellaneous[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Software update:   Automatic check off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Auto-CoverView:    off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: CoverView timeout: Never[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Auto-shuffle:      on[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Auto-play:         off, random toggle reset to off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Web SSH server:    off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Maintenance task:  360 mins[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Current view:      reset to Playback[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Active flags:      all false[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Reset flags:       skipped[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Session check:     ok[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: -- Startup complete [/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: --[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Mount monitor:    started[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Radio monitor:    off[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Watchdog monitor: started[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Responsiveness:   Default[/font][/size][/color]
[color=#262626][size=small][font=Monaco]20240726 142709 worker: Ready[/font][/size][/color]

[PJVervoorn]

More testing, I should have tried this before…
When I select one of the predefined yml files all is OK, I tried several V2 ymls; the problem occurs when using an uploaded file, that was downloaded from 8.3.9.
Did the format change from 8.3.9 to 9.0.x?
(The file validates OK when uploading.)