Best setup recommendation UPNP

[Klavius]

Dear audio enthusiasts

Please your advice on how to setup moode to get the most out of it.

My setup is
Allo Digione on top of RPi3
Ares II Dac using coaxial input

I'm streaming Tidal using UPNPbubble and mconnect.
The last one supports sending 24 bit 48khz.

Is moode doing something to the stream before sending it to the DAC?

The audio info shows that bitrate Is different when using 24 bit 48khz tracks.

When using 16bit 44.1 it simply do es not show the  decoding rate.

Is there something messing with stream and degrading audio quality?

What can I do to setup moode and get the best?

 


Audio Information

Audio Information

INPUT / OUTPUT
Source: 
http://192.168.50.50:18740/tidal/68669524.flac
Encoded at: 
Unknown
Decoded to: 
24 bit, 48 kHz, Stereo, 1.672 Mbps
Destination: 
Local
Output rate: 
24 bit, 48 kHz, Stereo, 2.304 Mbps



[color= var(--adapttext)]
INPUT / OUTPUT
Source: 
http://192.168.50.50:18740/tidal/230730.flac
Encoded at: 
Unknown
Decoded to: 
16 bit, 44.1 kHz, Stereo,
Destination: 
Local
Output rate: 
16 bit, 44.1 kHz, Stereo, 1.411 Mbps
DSP OPERATIONS
Volume ctl: 
Disabled (100% volume is output by MPD)
Resampling: 
off
Polarity inv: 
off
Crossfade: 
off
Crossfeed: 
off
Parametric EQ: 
off
Graphic EQ: 
off
Replaygain: 
off
Normalize vol: 
off
Chip options: 
None
AUDIO DEVICE
Device: 
Allo DigiOne
Mixer name: 
Digital
Chip: 
Cirrus Logic WM8805
Interface: 
I2S
Formats: 
S16_LE, S24_LE
Platform: 
Pi-3B+ 1GB v1.3[/color]