[SOLVED] About config file question about 3.5 GPIO TFT

[eric00886]

Update 2020/12/08:

I checked the driver install sh file and check one by one, then:

1. Copy TFT drive file to /boot/overlay
2. Change the driver name in /boot/config.txt
3. Add "fbcon=map:10" in /boot/cmdline.txt
4. Add parameter in 99-xxx file
5. Enable local UI

Then it work. I can see Moode UI in my 3.5 TFT LCD. I am working in it still due to the display has some problem...

PS. Some thing wrong by 3.5 TFT install file.