Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Official moOde 7.3.0 support thread
(08-28-2021, 08:00 PM)Tim Curtis Wrote: I'm not able to repro this because WiFi works fine for me in Step 1 - "From power off, no ethernet plugged in = no wifi.".

All my Pi's except for one are all using just WiFi.

I'm not sure if I'd call this progress but I've gotten somewhere, it seems that without an ethernet cable plugged in it gets stuck in AP mode.

1. I reset the network settings.
2. With ethernet plugged in, setup my wifi network again.
3. Same behavior as before, with ethernet unplugged no wifi connection.
4. However, it switches into AP mode when the ethernet is unplugged.
5. Connect to Moode AP network via IP 172.24.1.1
6. Setup wifi network to connect to again.
7. Same issue, without ethernet plugged in, it switched over to AP mode.
8. As soon as I plug in the ethernet, everything goes back to normal functionality in eth0 or wifi.
Reply


Messages In This Thread
Camilla convolution filter plots - by Macdelf - 06-29-2021, 01:34 PM
RE: Camilla convolution filter plots - by Macdelf - 06-29-2021, 03:04 PM
RE: Camilla convolution filter plots - by Macdelf - 06-29-2021, 11:41 PM
Official moOde 7.3.0 support thread - by KmPan - 08-22-2021, 10:49 AM
RE: Official moOde 7.3.0 support thread - by eraser1320 - 08-29-2021, 12:09 PM

Forum Jump: