04-19-2025, 05:21 PM
Hi Tim,
I finally found the reason and could solve the issue.
I started with a fresh installation and everything works fine.
The troubles occur after importing the backup of my 8.3.9 settings.
I did not see at first any relationship to the audio device settings, since radio streams were playing, but not tracks which rather made me think of access problems.
I imported then the backup from the fresh installation. But neverytheless, at first the issue persisted. I had to switch back and forth between device 0 (HDMI) and 2 (Audiophonics), what finally brought the system back to life,
Does perhaps the device=0 setting in [MPD options] is causing the problem?
An [Audio Device] section as in 9.x backup does not exist.
BTW: Neither journalctl nor the mpd debug log reported any errors. And alsamixer looked normal as well.
Thx and have a pleasant Easter weekend.
Walther
I finally found the reason and could solve the issue.
I started with a fresh installation and everything works fine.
The troubles occur after importing the backup of my 8.3.9 settings.
Code:
[I2S Device]
i2soverlay =None"
i2sdevice = "Audiophonics ES9028/9038 DAC"
[ALSA]
alsa_output_mode = "plughw"
alsa_loopback = "Off"
[MPD Config]
mixer_type = "hardware"
device = "0"
audio_output_format = "disabled"
selective_resample_mode = "0"
sox_quality = "high"
sox_multithreading = "1"
sox_precision = "20"
sox_phase_response = "50"
sox_passband_end = "95"
sox_stopband_begin = "100"
sox_attenuation = "0"
sox_flags = "0"
dop = "no"
replaygain = "auto"
replaygain_preamp = "0"
volume_normalization = "no"
audio_buffer_size = "16384"
max_output_buffer_size = "262144"
max_playlist_length = "16384"
input_cache = "256 MB"
log_level = "default"
stop_dsd_silence = "no"
thesycon_dsd_workaround = "no"I did not see at first any relationship to the audio device settings, since radio streams were playing, but not tracks which rather made me think of access problems.
I imported then the backup from the fresh installation. But neverytheless, at first the issue persisted. I had to switch back and forth between device 0 (HDMI) and 2 (Audiophonics), what finally brought the system back to life,
Does perhaps the device=0 setting in [MPD options] is causing the problem?
An [Audio Device] section as in 9.x backup does not exist.
BTW: Neither journalctl nor the mpd debug log reported any errors. And alsamixer looked normal as well.
Thx and have a pleasant Easter weekend.
Walther
