04-25-2025, 04:02 PM
(04-24-2025, 04:08 PM)Tim Curtis Wrote: Reboot and then post the entire contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
Hi TIm,
Thanks for your reply,
1) I could not download of the files as I keep getting a "please match the requested format" pop up for host/player name. It is the same as the player and the same on the network but no matter what I keep getting this message. I tried a reset and keep getting a "upload file" pop up and windows won't allow me to.
2) I pulled the card and copied the txt files
3) there is a .REC file which has bunch of "nuls" and "y"s at the end (could not copy them)
Thanks again for your help
CONFIG.TXT
#########################################
# This file is managed by moOde
#########################################
# Device filters
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
hdmi_enable_4kp60=0
[all]
dtoverlay=vc4-kms-v3d
max_framebuffers=2
display_auto_detect=1
disable_fw_kms_setup=1
arm_64bit=1
# General settings
arm_boost=0
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on
# Do not alter this section
# Integrated adapters
#dtoverlay=disable-bt
#dtoverlay=disable-wifi
# Audio overlays
#dtoverlay=none
#dtoverlay=force_eeprom_read=0
# PCI Express
#dtparam=pciex1
#dtparam=pciex1_gen=3
# Pi Touch1
#dtoverlay=vc4-kms-dsi-7inch,invx,invy
# Fan speed
#dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75
\\\\\\\\\\
CMDLINE.TXT
console=serial0,115200 console=tty1 root=PARTUUID=2d889092-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=CA
\\\\\\\\\\
ISSUE.TXT
Raspberry Pi reference 2024-12-30
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 6fb311e7fb57b4e7980ae3270c25b569b19dfe8f, stage3
\\\\\\\\\\\
#########################################
# This file is managed by moOde
#########################################
# Device filters
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
hdmi_enable_4kp60=1
[all]
dtoverlay=vc4-kms-v3d
max_framebuffers=2
display_auto_detect=1
disable_fw_kms_setup=1
arm_64bit=1
# General settings
arm_boost=0
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on
# Do not alter this section
# Integrated adapters
#dtoverlay=disable-bt
#dtoverlay=disable-wifi
# Audio overlays
dtoverlay=hifiberry-digi-pro
dtoverlay=force_eeprom_read=0
# PCI Express
#dtparam=pciex1
#dtparam=pciex1_gen=3
# Pi Touch1
#dtoverlay=vc4-kms-dsi-7inch,invx,invy
# Fan speed
#dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75
#########################################
# This file is managed by moOde
#########################################
# Device filters
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
hdmi_enable_4kp60=1
[all]
dtoverlay=vc4-kms-v3d
max_framebuffers=2
display_auto_detect=1
disable_fw_kms_setup=1
arm_64bit=1
# General settings
arm_boost=0
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on
# Do not alter this section
# Integrated adapters
#dtoverlay=disable-bt
#dtoverlay=disable-wifi
# Audio overlays
dtoverlay=hifiberry-digi-pro
dtoverlay=force_eeprom_read=0
# PCI Express
#dtparam=pciex1
#dtparam=pciex1_gen=3
# Pi Touch1
#dtoverlay=vc4-kms-dsi-7inch,invx,invy
# Fan speed
#dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75
#########################################
# This file is managed by moOde
#########################################
# Device filters
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
hdmi_enable_4kp60=1
[all]
dtoverlay=vc4-kms-v3d
max_framebuffers=2
display_auto_detect=1
disable_fw_kms_setup=1
arm_64bit=1
# General settings
arm_boost=0
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on
# Do not alter this section
# Integrated adapters
#dtoverlay=disable-bt
#dtoverlay=disable-wifi
# Audio overlays
dtoverlay=hifiberry-digi-pro
dtoverlay=force_eeprom_read=0
# PCI Express
#dtparam=pciex1
#dtparam=pciex1_gen=3
# Pi Touch1
#dtoverlay=vc4-kms-dsi-7inch,invx,invy
# Fan speed
#dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75
#########################################
# This file is managed by moOde
#########################################
# Device filters
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
hdmi_enable_4kp60=1
[all]
dtoverlay=vc4-kms-v3d
max_framebuffers=2
display_auto_detect=1
disable_fw_kms_setup=1
arm_64bit=1
# General settings
arm_boost=0
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=on
# Do not alter this section
# Integrated adapters
#dtoverlay=disable-bt
#dtoverlay=disable-wifi
# Audio overlays
dtoverlay=hifiberry-digi-pro
dtoverlay=force_eeprom_read=0
# PCI Express
#dtparam=pciex1
#dtparam=pciex1_gen=3
# Pi Touch1
#dtoverlay=vc4-kms-dsi-7inch,invx,invy
# Fan speed
#dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75
