06-08-2025, 11:51 AM
Hi,
This is my first post here. I've been using moode audio on ethernet for about a year, but now need to use wifi. I'm having some problems and hoping someone can help me.
Set-up is Raspberry Pi 4 Model B 2GB and a HifiBerry Amp2, with music on a local usb drive. I've downloaded 2025-05-13-moode-r934-arm64-lite.img and written it to an sd card, configuring it for my wifi hub per the instructions. When I boot the pi with ethernet disconnected I am unable to access the device, and it doesn't appear to connect to the wifi hub. Connecting the ethernet cable gives me web access, and downloading the startup log gives me:
Clicking Configure -> Network shows the correct SSID ("Polygon") and WPA-PSK security, which is what I configured, Access method is DHCP, but underneath that box is says "Not in use" -- I don't know, but I suspect that this is because I subsequently connected the ethernet cable. I have multiple devices attached to the "Polygon" wifi hub that use DHCP.
I've tried configuring it (in the image writer) for a different wifi hub (my main router) and get the same outcome.
I'm unsure how to proceed from here, and am hoping that someone can suggest ways to troubleshoot this problem.
Thanks!
This is my first post here. I've been using moode audio on ethernet for about a year, but now need to use wifi. I'm having some problems and hoping someone can help me.
Set-up is Raspberry Pi 4 Model B 2GB and a HifiBerry Amp2, with music on a local usb drive. I've downloaded 2025-05-13-moode-r934-arm64-lite.img and written it to an sd card, configuring it for my wifi hub per the instructions. When I boot the pi with ethernet disconnected I am unable to access the device, and it doesn't appear to connect to the wifi hub. Connecting the ethernet cable gives me web access, and downloading the startup log gives me:
Code:
20250513 130129 worker: --
20250513 130129 worker: -- Network
20250513 130129 worker: --
20250513 130129 worker: WiFi SSID/PSK imported
20250513 130129 worker: Eth0
20250513 130129 worker: Ethernet: adapter exists
20250513 130129 worker: Ethernet: timeout off
20250513 130129 worker: Ethernet: address not assigned
20250513 130129 worker: Wlan0
20250513 130129 worker: Wireless: adapter exists
20250513 130129 worker: Wireless: country GB
20250513 130129 worker: Wireless: SSID Polygon
20250513 130129 worker: Wireless: other None
20250513 130129 worker: Wireless: timeout up to 90 secs
20250513 130301 worker: Wireless: address not assigned
20250513 130301 worker: Wireless: Hotspot activating
20250513 130301 worker: Wireless: timeout up to 90 secs
20250513 130433 worker: Wireless: address not assigned
20250513 130433 worker: No active network interface
20250513 130433 worker: mDNS
20250513 130433 worker: Discover: IPv4 and IPv6Clicking Configure -> Network shows the correct SSID ("Polygon") and WPA-PSK security, which is what I configured, Access method is DHCP, but underneath that box is says "Not in use" -- I don't know, but I suspect that this is because I subsequently connected the ethernet cable. I have multiple devices attached to the "Polygon" wifi hub that use DHCP.
I've tried configuring it (in the image writer) for a different wifi hub (my main router) and get the same outcome.
I'm unsure how to proceed from here, and am hoping that someone can suggest ways to troubleshoot this problem.
Thanks!
