Posts: 6
Threads: 0
Joined: Apr 2025
Reputation:
0
(04-27-2025, 10:27 PM)Tim Curtis Wrote: Reboot and then post the entire startup log.
Hi, here is.
Code: pi@moode:~ $ moodeutl -l
20250428 063841 worker: --
20250428 063841 worker: -- Start moOde 9 series
20250428 063841 worker: --
20250428 063841 worker: Daemonize: complete
20250428 063842 worker: Linux startup: complete
20250428 063842 worker: Boot config: ok
20250428 063842 worker: Boot folder: ok
20250428 063842 worker: Radio table: ok
20250428 063844 worker: PHP session: cleaned
20250428 063844 worker: PHP session: loaded
20250428 063846 worker: Package locks: applied
20250428 063848 worker: File check: complete
20250428 063848 worker: Log to RAM: on
20250428 063848 worker: Tmp to RAM: on
20250428 063848 worker: Debug logging: off
20250428 063848 worker: --
20250428 063848 worker: -- System
20250428 063848 worker: --
20250428 063850 worker: Host name: moode
20250428 063850 worker: RPi model: Pi-4B 1.4 2GB
20250428 063851 worker: moOde release: 9.3.2 2025-04-16
20250428 063851 worker: RaspiOS: 12.10 Bookworm 64-bit
20250428 063851 worker: Linux Kernel: 6.12.20 64-bit
20250428 063851 worker: MPD version: 0.24.3
20250428 063851 worker: User id: pi
20250428 063851 worker: Home folder: /home/pi
20250428 063851 worker: Time zone: Europe/Zagreb
20250428 063851 worker: Kbd layout: hr
20250428 063851 worker: HDMI ports(s): on
20250428 063851 worker: HDMI-CEC: off
20250428 063851 worker: Sys LED0: on
20250428 063851 worker: Sys LED1: on
20250428 063851 worker: Reduce power: n/a
20250428 063851 worker: Fan control: n/a
20250428 063851 worker: CPU governor: ondemand
20250428 063851 worker: --
20250428 063851 worker: -- Network
20250428 063851 worker: --
20250428 063851 worker: Eth0
20250428 063851 worker: Ethernet: adapter exists
20250428 063851 worker: Ethernet: timeout off
20250428 063851 worker: Ethernet: method dhcp
20250428 063851 worker: Ethernet: address 192.168.5.2
20250428 063851 worker: Ethernet: netmask 255.255.255.0
20250428 063851 worker: Ethernet: gateway 192.168.5.1
20250428 063851 worker: Ethernet: pri DNS 192.168.5.1
20250428 063851 worker: Ethernet: domain Home
20250428 063851 worker: Wlan0
20250428 063851 worker: Wireless: adapter does not exist
20250428 063851 worker: mDNS
20250428 063851 worker: Discover: IPv4 and IPv6
20250428 063851 worker: --
20250428 063851 worker: -- File sharing
20250428 063851 worker: --
20250428 063851 worker: SMB file sharing: off
20250428 063851 worker: SMB password: none
20250428 063851 worker: NFS file sharing: off
20250428 063851 worker: DLNA file sharing: off
20250428 063851 worker: --
20250428 063851 worker: -- Special configs
20250428 063851 worker: --
20250428 063851 worker: Plexamp: not installed
20250428 063851 worker: RoonBridge: not installed
20250428 063851 worker: Allo Boss 2: not detected, OLED script ok
20250428 063851 worker: Allo Piano 2.1: not detected
20250428 063851 worker: IQaudIO DigiAMP+: not detected
20250428 063851 worker: RPi DigiAMP+: not detected
20250428 063851 worker: Bluetooth: session vars ok
20250428 063851 worker: --
20250428 063851 worker: -- ALSA debug
20250428 063851 worker: --
20250428 063851 worker: Cards: 0:Tone1 1:vc4hdmi0 2:vc4hdmi1 3:empty
20250428 063851 worker: 4:empty 5:empty 6:empty 7:empty
20250428 063852 worker: Mixers: 0:(Tone1 ) 1:none 2:none 3:none
20250428 063852 worker: 4:none 5:none 6:none 7:none
20250428 063852 worker: --
20250428 063852 worker: -- Audio configuration
20250428 063852 worker: --
20250428 063852 worker: Audio device: 0:Tone1
20250428 063852 worker: ALSA card: has not been reassigned
20250428 063852 worker: MPD config: update not needed
20250428 063852 worker: ALSA output: USB
20250428 063852 worker: ALSA mode: Default (plughw)
20250428 063852 worker: ALSA mixer: Tone1
20250428 063853 worker: ALSA volume: 100% (0.00dB)
20250428 063853 worker: ALSA maxvol: 100%
20250428 063853 worker: ALSA loopback: off
20250428 063853 worker: MPD mixer Software
20250428 063853 worker: Integ audio: vc4-kms-v3d
20250428 063853 worker: Audio formats: S32_LE, SPECIAL, DSD_U32_BE
20250428 063853 worker: CamillaDSP: off
20250428 063853 worker: CDSP volume: 0dB
20250428 063853 worker: CDSP volrange: 60dB
20250428 063853 worker: --
20250428 063853 worker: -- MPD startup
20250428 063853 worker: --
20250428 063854 worker: MPD service: started
20250428 063854 worker: MPD port 6600: accepting connections
20250428 063854 worker: MPD ALSA Default: on
20250428 063854 worker: MPD ALSA Bluetooth: off
20250428 063854 worker: MPD HTTP Server: off
20250428 063854 worker: MPD volume: 0
20250428 063854 worker: Saved MPD vol: -1
20250428 063854 worker: Saved SRC vol: 0
20250428 063854 worker: MPD crossfade: off
20250428 063854 worker: MPD ignore CUE: yes
20250428 063854 worker: MPD CDSP volsync: off
20250428 065100 worker: --
20250428 065100 worker: -- Music sources
20250428 065100 worker: --
20250428 065100 worker: USB drives: none
20250428 065100 worker: NVMe drives: none
20250428 065100 worker: SATA drives: none
20250428 065100 worker: NAS source: Router (smb)
20250428 065103 worker: --
20250428 065103 worker: -- Feature availability
20250428 065103 worker: --
20250428 065103 worker: Input select: available, Source: MPD, Output: Tone1
20250428 065103 worker: Bluetooth: available, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20250428 065103 worker: AirPlay: available
20250428 065103 worker: Spotify Connect: available
20250428 065103 worker: Deezer Connect: available
20250428 065103 worker: Squeezelite: available
20250428 065103 worker: UPnP client: available
20250428 065103 worker: Plexamp: not installed, ALSA maxvol: 100%
20250428 065103 worker: RoonBridge: not installed
20250428 065103 worker: Multiroom: available
20250428 065103 worker: GPIO buttons: available
20250428 065103 worker: Stream recorder: n/a
20250428 065103 worker: --
20250428 065103 worker: -- Security
20250428 065103 worker: --
20250428 065103 worker: Web SSH server: off
20250428 065103 worker: XSS detection: off
20250428 065103 worker: HTTPS mode: available
20250428 065103 worker: --
20250428 065103 worker: -- Peripherals
20250428 065103 worker: --
20250428 065105 worker: Local display: off
20250428 065105 worker: Chromium ver: 126.0.6478.164-rpt1
20250428 065105 worker: Chromium cfg: directory ok
20250428 065105 worker: Screen blank 600
20250428 065105 worker: On-screen kbd: off
20250428 065105 worker: Disable GPU: off
20250428 065105 worker: HDMI orient: landscape
20250428 065105 worker: HDMI 4K 60Hz: off
20250428 065105 worker: DSI scn type: none
20250428 065105 worker: DSI port: 1
20250428 065105 worker: DSI brightness: 255
20250428 065105 worker: DSI rotate: 0
20250428 065105 worker: Rotary encoder: off
20250428 065105 worker: Triggerhappy: off
20250428 065105 worker: LCD updater: off
20250428 065105 worker: --
20250428 065105 worker: -- Miscellaneous
20250428 065105 worker: --
20250428 065105 worker: Software update: Automatic check off
20250428 065105 worker: Auto-CoverView: off
20250428 065105 worker: CoverView timeout: Never
20250428 065105 worker: Auto-shuffle: off
20250428 065105 worker: Auto-play: off
20250428 065105 worker: Maintenance task: 360 mins
20250428 065105 worker: Current view: reset to Playback
20250428 065105 worker: Active flags: all false
20250428 065105 worker: Reset flags: skipped
20250428 065105 worker: Session check: ok
20250428 065105 worker: --
20250428 065105 worker: -- Startup complete
20250428 065105 worker: --
20250428 065105 worker: Mount monitor: started
20250428 065105 worker: Radio monitor: off
20250428 065106 worker: Watchdog monitor: started
20250428 065106 worker: Responsiveness: Default
20250428 065106 worker: Ready
Posts: 25
Threads: 2
Joined: Jun 2021
Reputation:
0
05-02-2025, 12:49 AM
(This post was last modified: 05-02-2025, 12:56 AM by uteroid.)
I'm having similar issues since last version, I have 2 different PIs with Moode on them. Tried regenrating library the wheel never stop spinning even though in the terminal moodeutil -t says update was done, and I don't see newly added albums in my library. Happening on both PIs, my library is on a NAS.
I tried downgrading mpd sudo apt -y install mpd=0.24.2-1moode1 and regenerating, that didn't work
Posts: 14,793
Threads: 342
Joined: Mar 2018
Reputation:
609
(05-02-2025, 12:49 AM)uteroid Wrote: I'm having similar issues since last version, I have 2 different PIs with Moode on them. Tried regenrating library the wheel never stop spinning even though in the terminal moodeutil -t says update was done, and I don't see newly added albums in my library. Happening on both PIs, my library is on a NAS.
I tried downgrading mpd sudo apt -y install mpd=0.24.2-1moode1 and regenerating, that didn't work
Reboot one of the Pi's and then post the entire contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
Posts: 25
Threads: 2
Joined: Jun 2021
Reputation:
0
(05-02-2025, 12:58 AM)Tim Curtis Wrote: (05-02-2025, 12:49 AM)uteroid Wrote: I'm having similar issues since last version, I have 2 different PIs with Moode on them. Tried regenrating library the wheel never stop spinning even though in the terminal moodeutil -t says update was done, and I don't see newly added albums in my library. Happening on both PIs, my library is on a NAS.
I tried downgrading mpd sudo apt -y install mpd=0.24.2-1moode1 and regenerating, that didn't work
Reboot one of the Pi's and then post the entire contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
here ya go!
Code: 20250501 210745 worker: --
20250501 210746 worker: -- Start moOde 9 series
20250501 210746 worker: --
20250501 210746 worker: Daemonize: complete
20250501 210752 worker: Linux startup: complete
20250501 210752 worker: Boot config: ok
20250501 210752 worker: Boot folder: ok
20250501 210752 worker: Radio table: ok
20250501 210752 worker: PHP session: cleaned
20250501 210752 worker: PHP session: loaded
20250501 210756 worker: Package locks: applied
20250501 210756 worker: File check: complete
20250501 210756 worker: Log to RAM: on
20250501 210756 worker: Tmp to RAM: on
20250501 210756 worker: Debug logging: off
20250501 210756 worker: --
20250501 210756 worker: -- System
20250501 210756 worker: --
20250501 210801 worker: Host name: moode
20250501 210801 worker: RPi model: Pi-5B 1.0 4GB
20250501 210801 worker: moOde release: 9.3.3 2025-04-29
20250501 210801 worker: RaspiOS: 12.9 Bookworm 64-bit
20250501 210801 worker: Linux Kernel: 6.12.20 64-bit
20250501 210801 worker: MPD version: 0.24.3
20250501 210801 worker: User id: alexryaboy
20250501 210801 worker: Home folder: /home/alexryaboy
20250501 210801 worker: Time zone: America/Detroit
20250501 210801 worker: Kbd layout: us
20250501 210801 worker: HDMI ports(s): on
20250501 210801 worker: HDMI-CEC: off
20250501 210801 worker: Sys LED0: on
20250501 210801 worker: Sys LED1: on
20250501 210801 worker: Reduce power: off
20250501 210801 worker: Fan control: 50C, 45C, 75
20250501 210801 worker: CPU governor: ondemand
20250501 210801 worker: --
20250501 210801 worker: -- Network
20250501 210801 worker: --
20250501 210801 worker: Eth0
20250501 210801 worker: Ethernet: adapter exists
20250501 210801 worker: Ethernet: timeout off
20250501 210801 worker: Ethernet: address not assigned
20250501 210801 worker: Wlan0
20250501 210801 worker: Wireless: adapter exists
20250501 210801 worker: Wireless: country US
20250501 210801 worker: Wireless: SSID lvyonok5ghz
20250501 210801 worker: Wireless: other None
20250501 210801 worker: Wireless: timeout up to 90 secs
20250501 210801 worker: Wireless: connect to lvyonok5ghz
20250501 210801 worker: Wireless: method dhcp
20250501 210801 worker: Wireless: address 192.168.0.192
20250501 210801 worker: Wireless: netmask 255.255.255.0
20250501 210802 worker: Wireless: gateway 192.168.0.1
20250501 210802 worker: Wireless: pri DNS 192.168.0.1
20250501 210802 worker: Wireless: domain none found
20250501 210802 worker: mDNS
20250501 210802 worker: Discover: IPv4 and IPv6
20250501 210802 worker: --
20250501 210802 worker: -- File sharing
20250501 210802 worker: --
20250501 210802 worker: SMB file sharing: off
20250501 210802 worker: SMB password: none
20250501 210802 worker: NFS file sharing: off
20250501 210802 worker: DLNA file sharing: off
20250501 210802 worker: --
20250501 210802 worker: -- Special configs
20250501 210802 worker: --
20250501 210802 worker: Plexamp: not installed
20250501 210802 worker: RoonBridge: not installed
20250501 210802 worker: Allo Boss 2: not detected, OLED script ok
20250501 210802 worker: Allo Piano 2.1: not detected
20250501 210802 worker: IQaudIO DigiAMP+: not detected
20250501 210802 worker: RPi DigiAMP+: not detected
20250501 210802 worker: Bluetooth: session vars ok
20250501 210802 worker: --
20250501 210802 worker: -- ALSA debug
20250501 210802 worker: --
20250501 210802 worker: Cards: 0:Digital 1:vc4hdmi0 2:vc4hdmi1 3:empty
20250501 210802 worker: 4:empty 5:empty 6:empty 7:empty
20250501 210802 worker: Mixers: 0:(Pre Box S2 Digital )1:none 2:none 3:none
20250501 210802 worker: 4:none 5:none 6:none 7:none
20250501 210802 worker: --
20250501 210802 worker: -- Audio configuration
20250501 210802 worker: --
20250501 210802 worker: Audio device: 0:Pre Box S2 Digital
20250501 210802 worker: ALSA card: has not been reassigned
20250501 210802 worker: MPD config: update not needed
20250501 210802 worker: ALSA output: USB
20250501 210802 worker: ALSA mode: Default (plughw)
20250501 210802 worker: ALSA mixer: Pre Box S2 Digital
20250501 210802 worker: ALSA volume: 100% (0.00dB)
20250501 210802 worker: ALSA maxvol: 100%
20250501 210802 worker: ALSA loopback: off
20250501 210802 worker: MPD mixer Software
20250501 210802 worker: Integ audio: vc4-kms-v3d
20250501 210802 worker: Audio formats: S32_LE, SPECIAL, DSD_U32_BE
20250501 210802 worker: CamillaDSP: off
20250501 210802 worker: CDSP volume: 0dB
20250501 210802 worker: CDSP volrange: 60dB
20250501 210802 worker: --
20250501 210802 worker: -- MPD startup
20250501 210802 worker: --
20250501 210803 worker: MPD service: started
20250501 210803 worker: MPD port 6600: accepting connections
20250501 210803 worker: MPD ALSA Default: on
20250501 210803 worker: MPD ALSA Bluetooth: off
20250501 210803 worker: MPD HTTP Server: off
20250501 210803 worker: MPD volume: 75
20250501 210803 worker: Saved MPD vol: -1
20250501 210803 worker: Saved SRC vol: 0
20250501 210803 worker: MPD crossfade: off
20250501 210803 worker: MPD ignore CUE: no
20250501 210803 worker: MPD CDSP volsync: off
20250501 210803 worker: --
20250501 210803 worker: -- Music sources
20250501 210803 worker: --
20250501 210803 worker: USB drives: none
20250501 210803 worker: NVMe drives: none
20250501 210803 worker: SATA drives: none
20250501 210803 worker: NAS source: HiRez (smb)
20250501 210803 worker: NAS source: Classical (smb)
20250501 210805 worker: --
20250501 210805 worker: -- Feature availability
20250501 210805 worker: --
20250501 210805 worker: Input select: available, Source: MPD, Output: Pre Box S2 Digital
20250501 210805 worker: Bluetooth: available, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20250501 210805 worker: Retry 1 waiting for metadata pipe
20250501 210807 worker: AirPlay: started
20250501 210807 worker: Spotify Connect: started
20250501 210807 worker: Deezer Connect: available
20250501 210807 worker: Squeezelite: available
20250501 210807 worker: UPnP client: available
20250501 210807 worker: Plexamp: not installed, ALSA maxvol: 100%
20250501 210807 worker: RoonBridge: not installed
20250501 210807 worker: Multiroom: available
20250501 210807 worker: GPIO buttons: available
20250501 210807 worker: Stream recorder: n/a
20250501 210807 worker: --
20250501 210807 worker: -- Security
20250501 210807 worker: --
20250501 210807 worker: Web SSH server: off
20250501 210807 worker: XSS detection: off
20250501 210807 worker: HTTPS mode: available
20250501 210807 worker: --
20250501 210807 worker: -- Peripherals
20250501 210807 worker: --
20250501 210809 worker: Local display: off
20250501 210809 worker: Chromium ver: 126.0.6478.164-rpt1
20250501 210809 worker: Chromium cfg: WARNING: directory /home/alexryaboy/.config does not exist
20250501 210809 worker: Screen blank 600
20250501 210809 worker: On-screen kbd: off
20250501 210809 worker: Disable GPU: off
20250501 210809 worker: HDMI orient: landscape
20250501 210809 worker: HDMI 4K 60Hz: off
20250501 210809 worker: DSI scn type: none
20250501 210809 worker: DSI port: 1
20250501 210809 worker: DSI brightness: 255
20250501 210809 worker: DSI rotate: 0
20250501 210809 worker: Rotary encoder: off
20250501 210809 worker: Triggerhappy: off
20250501 210809 worker: LCD updater: off
20250501 210809 worker: --
20250501 210809 worker: -- Miscellaneous
20250501 210809 worker: --
20250501 210809 worker: Software update: Automatic check off
20250501 210809 worker: Auto-CoverView: off
20250501 210809 worker: CoverView timeout: Never
20250501 210809 worker: Auto-shuffle: off
20250501 210809 worker: Auto-play: off
20250501 210809 worker: Maintenance task: 360 mins
20250501 210809 worker: Current view: reset to Playback
20250501 210809 worker: Active flags: all false
20250501 210809 worker: Reset flags: skipped
20250501 210809 worker: Session check: ok
20250501 210809 worker: --
20250501 210809 worker: -- Startup complete
20250501 210809 worker: --
20250501 210809 worker: Mount monitor: started
20250501 210809 worker: Radio monitor: off
20250501 210809 worker: Watchdog monitor: started
20250501 210809 worker: Responsiveness: Default
20250501 210809 worker: Ready
Posts: 14,793
Threads: 342
Joined: Mar 2018
Reputation:
609
I don't see anything suspicious in the log.
After regen if the log showed "worker: Job update_library done" but the busy spinner did not clear then its not obvious to me what might be happening.
Posts: 25
Threads: 2
Joined: Jun 2021
Reputation:
0
(05-02-2025, 10:32 AM)Tim Curtis Wrote: I don't see anything suspicious in the log.
After regen if the log showed "worker: Job update_library done" but the busy spinner did not clear then its not obvious to me what might be happening.
Where would I see that log entry? The only thing I saw after regen was "20250501 204932 thumb-gen: Done: 598 folders scanned, 597 thumbs created, 1 already in cache."
Posts: 14,793
Threads: 342
Joined: Mar 2018
Reputation:
609
(05-02-2025, 08:24 PM)uteroid Wrote: (05-02-2025, 10:32 AM)Tim Curtis Wrote: I don't see anything suspicious in the log.
After regen if the log showed "worker: Job update_library done" but the busy spinner did not clear then its not obvious to me what might be happening.
Where would I see that log entry? The only thing I saw after regen was "20250501 204932 thumb-gen: Done: 598 folders scanned, 597 thumbs created, 1 already in cache."
Here's what "Update library" looks like in the moode log (moodeutl -l). It's similar for regen.
Code: 20250502 180223 worker: Job update_library
20250502 180223 mpdindex: Start
20250502 180223 mpdindex: Cmd (update)
20250502 180223 thumb-gen: Start
20250502 180223 thumb-gen: Scan opt: Default+
20250502 180223 thumb-gen: Priority: Embedded cover
20250502 180223 thumb-gen: Res,Qual: 600px,60
20250502 180223 thumb-gen: Px ratio: 1
20250502 180223 thumb-gen: Th width: 600
20250502 180223 thumb-gen: Thm qual: 60
20250502 180223 thumb-gen: Scanning: NAS, NVME, SATA, SDCARD
20250502 180228 thumb-gen: Done: 397 folders scanned, 0 thumbs created, 397 already in cache.
20250502 180235 mpdindex: Done: indexed 305 artists, 396 albums, 4410 songs
20250502 180235 worker: Job update_library done
Posts: 25
Threads: 2
Joined: Jun 2021
Reputation:
0
Yea I never saw that last entry, also I have my moode set to update nightly, so it basically never completes, the circle spins and nothing gets updated
Posts: 14,793
Threads: 342
Joined: Mar 2018
Reputation:
609
Examine the MPD log for errors or to determine the last track that it successfully indexed.
Code: cat /var/log/mpd/log
Posts: 25
Threads: 2
Joined: Jun 2021
Reputation:
0
(05-03-2025, 12:44 AM)Tim Curtis Wrote: Examine the MPD log for errors or to determine the last track that it successfully indexed.
Code: cat /var/log/mpd/log
mine is empty
|
