Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: Analog input in multiroom.
#1
Hello, I wnat to bring the music from my Yamaha Receiver RN - 600 a via line out into the moodeaudio multiroom system. What is the right way to do this? Huh
Reply
#2
You'd need a Hifiberry DAC+ ADC. The ADC will convert your analogue input to digital for moOde to use, and it is the only analogue input device moOde supports. However, I'm not certain that input could be routed to multiroom, another would have to comment on that.
----------------
Robert
Reply
#3
The Multiroom Sender supports the following sources:
- MPD
- Bluetooth (inbound)
- AirPlay
- Spotify Connect

Line-in from a device like DAC+ ADC is not supported.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#4
(06-24-2025, 01:42 PM)the_bertrum Wrote: You'd need a Hifiberry DAC+ ADC.  The ADC will convert your analogue input to digital for moOde to use, and it is the only analogue input device moOde supports.  However, I'm not certain that input could be routed to multiroom, another would have to comment on that.

I have sold a DAC + ADC pro. It works good, but the input is not seen anywhere. Huh
Reply
#5
(06-24-2025, 02:32 PM)Tim Curtis Wrote: The Multiroom Sender supports the following sources:
- MPD
- Bluetooth (inbound)
- AirPlay
- Spotify Connect

Line-in from a device like DAC+ ADC is not supported.

Hello Tim, thank you for your post. I search a way to get my music from my receiver over multiroom to the other rooms of my house. I thaugt that the DAC+ ADC pro could be the right way but now i see that I was wrong. Perhaps  I should try Bluetooth.  Exclamation
Reply
#6
(06-24-2025, 02:32 PM)Tim Curtis Wrote: The Multiroom Sender supports the following sources:
- MPD
- Bluetooth (inbound)
- AirPlay
- Spotify Connect

Line-in from a device like DAC+ ADC is not supported.

You wrote:
Line-in from a device like DAC+ ADC is not supported. 

Will there be perhaps in the future a connection from the line input to multiroom?
Reply
#7
(06-24-2025, 01:14 PM)Hamimoode Wrote: Hello, I wnat to bring the music from my Yamaha Receiver RN - 600 a via line out into the moodeaudio multiroom system. What is the right way to do this? Huh

I want to plkay my records in my otherrooms from the receiver and I thought wether I play my whole music on the receiver, which works very fine: Sreaming, Phono, CD, NAS, Bluetoth and so on. It should be the center where I choose my music, which ist given to the multiroom center which bring it to the dac-raspberry pi slaves in the other rooms with Soundbaars, Speakers aktive or not , and other music players with AUX input.
Reply
#8
I am writing out of the top of my mind...
Maybe Jack-audio could be of some help...?
It can really do stuff. ATM I am not in a position, nor I have any spare time to investigate / check, but I am somehow confident it can be done with Jack.
Reply
#9
(06-24-2025, 04:26 PM)Hamimoode Wrote:
(06-24-2025, 02:32 PM)Tim Curtis Wrote: The Multiroom Sender supports the following sources:
- MPD
- Bluetooth (inbound)
- AirPlay
- Spotify Connect

Line-in from a device like DAC+ ADC is not supported.

Hello Tim, thank you for your post. I search a way to get my music from my receiver over multiroom to the other rooms of my house. I thaugt that the DAC+ ADC pro could be the right way but now i see that I was wrong. Perhaps  I should try Bluetooth.  Exclamation

It might work if the RN600 can successfully connect via Bluetooth to moode.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#10
(06-24-2025, 04:42 PM)Tim Curtis Wrote: It might work if the RN600 can successfully connect via Bluetooth to moode.

Even if it does, that would not be the same, in terms of fidelity; thing that - shall it work - JACK could assure. But if this is not an issue, that's the easiest thing to do.
Reply


Forum Jump: