Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Solved: Waveshare 6.25 display setup
#1
Hi All, 

Anyone can help on this suiation?

Just building a new moode unit with PI5+ 6.25 inch display (Brand waveshare). All the hardware are done. Now only have one issue, screen and touch rotation not work.... Only can display in vertical Confused. I had no idea on the code stuff (Sorry!). Anyone can help?

Attached the display information...but only have Chinese....

https://www.waveshare.net/wiki/6.25inch_DSI_LCD

Images of the unit:
   
   
   
Reply
#2
(03-09-2025, 08:43 AM)Alfred76 Wrote: Hi All, 

Anyone can help on this suiation?

Just building a new moode unit with PI5+ 6.25 inch display (Brand waveshare). All the hardware are done. Now only have one issue, screen and touch rotation not work.... Only can display in vertical Confused. I had no idea on the code stuff (Sorry!). Anyone can help?

Attached the display information...but only have Chinese....

https://www.waveshare.net/wiki/6.25inch_DSI_LCD

Images of the unit:


Hi Alfred76,
Please check the following forum thread, I used practically the same display (Waveshare also) and faced the same problem...
https://moodeaudio.org/forum/showthread.php?tid=7497
Be careful that mine is a DSI type.
Regards,
Jacques.
moOde 9.2.6 + RPi 4 2M + Ian Canada transportpi DIGI + Topping Velvet E70 + Waveshare 8.8inch DSI display 
Reply
#3
https://www.waveshare.com/6.25inch-DSI-LCD.htm
https://www.waveshare.com/wiki/6.25inch_DSI_LCD

English datasheet is here.
moOde 9.2.6 + RPi 4 2M + Ian Canada transportpi DIGI + Topping Velvet E70 + Waveshare 8.8inch DSI display 
Reply
#4
(03-12-2025, 07:42 PM)dac2audio Wrote:
(03-09-2025, 08:43 AM)Alfred76 Wrote: Hi All, 

Anyone can help on this suiation?

Just building a new moode unit with PI5+ 6.25 inch display (Brand waveshare). All the hardware are done. Now only have one issue, screen and touch rotation not work.... Only can display in vertical Confused. I had no idea on the code stuff (Sorry!). Anyone can help?

Attached the display information...but only have Chinese....

https://www.waveshare.net/wiki/6.25inch_DSI_LCD

Images of the unit:


Hi Alfred76,
Please check the following forum thread, I used practically the same display (Waveshare also) and faced the same problem...
https://moodeaudio.org/forum/showthread.php?tid=7497
Be careful that mine is a DSI type.
Regards,
Jacques.

Hi Jacques,

Thanks for your replied! My 6.25 inch screen are DSI either. Try to follow your method to edit the config.txt, change the parameter inside the moode. But no luck... Is it anything I doing wrong? But I am using Pi5.

   
   
   
   
Reply
#5
Wink 
Finally fixed!!! Big Grin

Setting with below code & parameter!!

   
   
   
   
   
   
Reply
#6
All that and you listen to Adele? Wink

It looks very nice. I love the "moOde" case.
----------------
Robert
Reply
#7
(03-18-2025, 02:34 PM)the_bertrum Wrote: All that and you listen to Adele? Wink

It looks very nice.  I love the "moOde" case.

This is the first version of the 3D print. Next version will  implement SSD internally. I can share this case 3D if anyone want it. But this LCD is not standard Raspberry 7". Used adaptor board to change the angle of HDMI  and USB C. Will create another 7" LCD case with Pi4.

   
Reply
#8
(03-18-2025, 01:41 PM)Alfred76 Wrote: Finally fixed!!! Big Grin

Setting with below code & parameter!!
Great!! Looks fine!!
moOde 9.2.6 + RPi 4 2M + Ian Canada transportpi DIGI + Topping Velvet E70 + Waveshare 8.8inch DSI display 
Reply
#9
(03-18-2025, 04:00 PM)Alfred76 Wrote:
(03-18-2025, 02:34 PM)the_bertrum Wrote: All that and you listen to Adele? Wink

It looks very nice.  I love the "moOde" case.

This is the first version of the 3D print. Next version will  implement SSD internally. I can share this case 3D if anyone want it. But this LCD is not standard Raspberry 7". Used adaptor board to change the angle of HDMI  and USB C. Will create another 7" LCD case with Pi4.

Yes, please. I‘m interested in the 3d files of the case. And may I ask witch loudspeakers you use? These are active ones right?
Greetings
Reply


Forum Jump: